Jump to content
SAU Community

Recommended Posts

First to lay down the background, have a read of this thread about the ATF coolers.

http://www.skylinesaustralia.com/forums/in...showtopic=59399

Now, I can offer these coolers 678 DC coolers with 3/8inch fitings for $118 each plus postage and handling. Pickup available in Blackburn area in Melbourne, postage anywhere in Australia also available. Postage costs will vary. Handling fees will be fixed at $10 for each item (to cover bubble wrap, packing materials, going to the post office etc).

Worst case scenario, to the middle of nowhere, postage will be ~20$ (Thats like postcode 0830 in NT). Sydney/Adelaide should be around $10, Melbourne $7, Brisbane $13.

These RRP for $150, but you need to go pick em up etc, they are not delivered to your door (yes, i am THAT lazy :))

I dont need to explain the product here, just read the thread above. Suitable for any Auto trans

So, who is interested

1. humble - picked up

2. bwilkeson - delivered to adelaide

3. pkblade - delivered to adelaide

4. skidkid - 2 units delivered to tassie

5. wagon - delivered to melbourne

6. AMS - delivered to country NSW

7. Nightcrawler - delivered to adelaide

8. MR_RS4 - delivered to brisbane

9.

10.

Once we know who is interested, I will send out the details of where everyone will need to make the payment. But for now, lets get some names.

Link to comment
https://www.sau.com.au/forums/topic/105610-gb-davis-craig-678-atf-coolers/
Share on other sites

Updated, will close the group buy in 1 weeks time on Wednesday 22nd. Then we will order and probably have them by the weekend. Then we can ship them off first thing monday for everyone.

Sure, 100%. Just thought the drive might be more expensive then getting it posted to you is all.

Obviously we will arrange pickup/delivery etc next week when I got buy them.

Anyone else interested?

Sent out PM's to all that were interested. Let me all know how it goes, cheers :P

Thanks, look'n 4ward to it!

Will have to scoure the thread 2 make sure I install it correctly!!

As far is I can see, and the info given to me by Abo Bob etc, there's nothing to it Bendan. If you want to have a 'fitting bee' in my garage one weekend, give me a yell. Probably easier with 2 guys?!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...