Jump to content
SAU Community

Recommended Posts

First to lay down the background, have a read of this thread about the ATF coolers.

http://www.skylinesaustralia.com/forums/in...showtopic=59399

Now, I can offer these coolers 678 DC coolers with 3/8inch fitings for $118 each plus postage and handling. Pickup available in Blackburn area in Melbourne, postage anywhere in Australia also available. Postage costs will vary. Handling fees will be fixed at $10 for each item (to cover bubble wrap, packing materials, going to the post office etc).

Worst case scenario, to the middle of nowhere, postage will be ~20$ (Thats like postcode 0830 in NT). Sydney/Adelaide should be around $10, Melbourne $7, Brisbane $13.

These RRP for $150, but you need to go pick em up etc, they are not delivered to your door (yes, i am THAT lazy :))

I dont need to explain the product here, just read the thread above. Suitable for any Auto trans

So, who is interested

1. humble - picked up

2. bwilkeson - delivered to adelaide

3. pkblade - delivered to adelaide

4. skidkid - 2 units delivered to tassie

5. wagon - delivered to melbourne

6. AMS - delivered to country NSW

7. Nightcrawler - delivered to adelaide

8. MR_RS4 - delivered to brisbane

9.

10.

Once we know who is interested, I will send out the details of where everyone will need to make the payment. But for now, lets get some names.

Link to comment
https://www.sau.com.au/forums/topic/105610-gb-davis-craig-678-atf-coolers/
Share on other sites

Updated, will close the group buy in 1 weeks time on Wednesday 22nd. Then we will order and probably have them by the weekend. Then we can ship them off first thing monday for everyone.

Sure, 100%. Just thought the drive might be more expensive then getting it posted to you is all.

Obviously we will arrange pickup/delivery etc next week when I got buy them.

Anyone else interested?

Sent out PM's to all that were interested. Let me all know how it goes, cheers :P

Thanks, look'n 4ward to it!

Will have to scoure the thread 2 make sure I install it correctly!!

As far is I can see, and the info given to me by Abo Bob etc, there's nothing to it Bendan. If you want to have a 'fitting bee' in my garage one weekend, give me a yell. Probably easier with 2 guys?!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...