Jump to content
SAU Community

Recommended Posts

Yes Chris, Will be sent off monday along with Wagons. Sorry about the short delay.

For others interested, i wont be running the buy again. its too far for me to drive to make it worth while. PM humble, he could hook you up.

Yes Chris, Will be sent off monday along with Wagons. Sorry about the short delay.

For others interested, i wont be running the buy again. its too far for me to drive to make it worth while. PM humble, he could hook you up.

No problem Alex :)

i would be interested, but i need one pretty urgently now (i was too indecisive previously to join the first gb :| ).

which retail store sell these? or where can i get them from as i need one before the end of the week....

If you need one urgently, PM a member called "humble"

BUT, i dont think he will handle postage etc of the units, rather that is why I ran the group buy.

The units are purchased from Bursons, but at pretty big mates rates, so its not like any walk in can get it.

I am going to run this group buy again, BUT I am going to invest my own money and buy 10 units and just send them off as people join. Though, that doesnt mean they will stick around for ever, Ive already got several people interested so those 10 will be snapped up quite quick.

I will let everyone know what is happening and start a new thread.

  • 2 months later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...