Jump to content
SAU Community

Recommended Posts

Hey guys

have 201rwkw on a r33 series 1 gtst

power fc

Hiflow cat

AVCR

FMIC

CES Racing 3" split dump

Set on 12psi at the moment

I have purchased a hiflow turbo ( plain bearing)

at the moment gettin new bearings put in it ( not ball bearing)

I'm going to be uppin the boost abit to a safe level.

Should i consider getting other things at the same time

like

Walboro fuel pump ( I did buy a bosch pump 040 but, i want to put it in myself and im not goin to bugger around with making a bracket for it.)

Injectors

Z32 AFM

Any help would be much appreciated

I would like to get close to 230rwkw

Thanks

Edited by bazr33
Link to comment
https://www.sau.com.au/forums/topic/105688-200rwkw-and-beyond/
Share on other sites

gtr pump will be cheaper and direct fit and run at 12v instead of the walbro needing to run at 15volts. z32 is direct swap powerfc (needs AFR check) and get some s15 manual injectors (480cc) and it should all be fine

just the standard r33 series 1 turbo im guessing

plain bearing

Steel wheels

it is at turbo australia at the moment, getting new bearings put in it and rebalanced

as it did have a lil bit of movement in the shaft

Not sure of the specs and whateva, soon will find out when i get it back.

Edited by bazr33

You will be a little dissapointed with that turbo bazr33, I know, I`ve been there.Read a couple of posts up on hi-flowed injectors and it may give you some idea where your headed.I did try the cheap hi-flow turbo and didn`t like it.To slow.Not painful but got a gcg hi-flow and it was much better.I would certainly spend the money and go ball bearing.Anyhow, if you get the z32 afm and some injectors try 14LB boost and you will be happy, very happy. :wavey:

You shouldn't need injectors to get to 230rwkw at all. You can save hundreds here. A new fuel pump and a fuel pressure regulator should be plenty to get that power.

Speaking with my personal experience where I've made 240rwkw with pump and fpr. However, I'm limited to 16psi where my turbo wants to run 20. Injectors are next but for 230rwkw I wouldn't bother.

  • 5 months later...

have 230rwkw

with walbro fuel pump and the hiflow plain bearing turbo set on 12psi

(also the mods i have listed at the start of course)

next is 555cc injectors, z32afm and fuel reg and goin to 18psi

also have just purchased a aerospeed exhaust side cam gear

so i'll see if that makes any difference

240rwkw would be acheivable on standard injectors and running a fuel reg, as on standard injectors im only 10kw away from it.

with the 555cc injectors that im going to put in, with the z32 afm aswell

we are hoping to hit 260rwkw, and cant see why that wouldnt be possible

Yes the plain bearing will get hotter and take longer to spool up, but aslong as theres sufficient oil flow, and not sitting on 18psi everyday,every minute, i think it will be fine.

But if the turbo does decide to shit itself, it will be a rebuild or new one.

Obviously im just wanting a safe tune, 260rwkw is going to be my limit, with still having a standard engine.

Will let you guys know if she blows or if she goes and hits the mark.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...