Jump to content
SAU Community

Recommended Posts

im pretty ure that it is hooked up rite its just bolt on and i put the vaccum on the hose was to big so i slid the new hose in the old 1 maybe it didnt seal??? i will try and fit it better ! thanks for the help i will let u know how i go

Link to comment
https://www.sau.com.au/forums/topic/105723-hks-ssq/#findComment-1948271
Share on other sites

no good just replaced all the vacuum hose wlth a hole new line that fits real good and its still not blowin off, its just flutterin through the pod?? its bolted straight on to the stock cooler piping with a gasket in between.. msut need more boost maybe???

Link to comment
https://www.sau.com.au/forums/topic/105723-hks-ssq/#findComment-1948511
Share on other sites

im pretty ure that it is hooked up rite its just bolt on and i  put the vaccum on the hose was to big so i slid the new hose in the old 1 maybe it didnt seal??? i will try and fit it better ! thanks for the help i will let u know how i go

Try loosen the nut at the back of the bov a bit.

Link to comment
https://www.sau.com.au/forums/topic/105723-hks-ssq/#findComment-1949534
Share on other sites

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...