Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Well the good news is i've fixed my gearstick issue (genuine toyota parts :P) it prob needs a 500-1000km run to bed in properly but meh a nite at the drags should be just as good.

The bad news is.... i'm all out of excuses.... it's just me and machine now! So providing my visa card decides to start working again i'll be there just after 5pm

;)

Seems I don't even need to post my times :P

Did a 13.0 @ 112.9mph (1.79sec) still with gear problems. The clutch appears to be engaging even with my pedal on the floor (car is creeping forward at the lights, had to use my handbrake to try and hold it back). I'll try and get that looked at b4 next wed and head back out there again.

Still though, I did a new pb for 60ft, ET, TS so i'll be back again shortly :D

Hey Ben i was there watching you, i was with some people in the stand taking a break when you started and they were like hehehe he's missed a gear! but silently i knew you had troubles.

I was happy with my outing though, a 14.1 at 97mph stock except exhaust!

ben, it sounds like you have a hydraulic problem (possibly slave cylinder). I had a smiliar thing on the GTR. just enough of a slight leak so that it wouldn't push the fork far enough to completely disengage the clutch, which meant creeping, and difficult gear slection. a new slave is only about $70 from nissan and you can change it youself in about 10 mins. if you are skinny you can probably even do it without jacking up the car (needless to say, i had to jack it up!).

Yes it certainly has an issue, hydraulic or whatever i'm not sure but i'll be getting it looked at sometime hopefully before next wednesday so I can get back out there again.

I'm not resting until I see 11's :P




  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...