Jump to content
SAU Community

Recommended Posts

So i was just wondering where abouts you all buy your equipment from and can anyone recommend the best place for me to purchase my camera and a lens maybe???

Im looking at the CANON 20D and a zoom lens that i can use plus info on the best memory card for the camera to get?

Cheers GMB

Link to comment
https://www.sau.com.au/forums/topic/105931-where-do-you-buy-your-equipment/
Share on other sites

yeah well i was thinking Ebay but not sure who to deal with or just take a stab in the dark and just buy the cheapest 20D package i can find!!!

Or do i pay a little extra and just buy the body from a shop and get the lens, card and accessories from Ebay???

<_<

Guys Guys Guys STOP RIGHT THERE!!!

You buy cannon cameras so that you can have their LENSES NOT THE BODY!!!!

With out lense its USELESS!!

Get camera with Good lense. FULL STOP!!!

cheers

Joe

lol

what on earth are you talking about joe

not bad

although it comes with no lens :)

thats a good thing

buy that

and then buy a tamron 28-75mm f/2.8 lens for your walkaround lens

or whatever lens you want to buy

saving yourself money, and you dont get dodgy kit lenses

lol

what on earth are you talking about joe

thats a good thing

buy that

and then buy a tamron 28-75mm f/2.8 lens for your walkaround lens

or whatever lens you want to buy

saving yourself money, and you dont get dodgy kit lenses

Yeah i realise that the lens is what makes the photo.

But my point was that camera was pretty expensive considering it didn't come with anything else.

Im in two minds at the moment.

1) Do i just hold off and buy a 20D with the 90-300mm Canon lens

2) Get the 350D with a better lens and go from there!!!

GMB

90-300 lens is shit.

it seems like youre only buying a 20d to wank over, rather than use the extra features, so just get the 350d with a good lens

Well no i wanted to get the 20D as its a better camera and i belive that once i get used to it and all the features and be able to shoot in manual mode then i can get better photo's for what i want to do.

I said the 90-300 lens as thats what would come with the camera if i bought it locally here in the shops.

I know its a tad to slow for what i want and didn't plan on using it for very long.

Was going to look at either Tamron AF 28-75mm f/2.8 to start or save about $1200 and buy the Canon 70-200.

Cheers GMB

Yeah i realise that the lens is what makes the photo.

No its the photographer that makes the foto, not the camera nor the lens. Both are just an extension of their eye!! :tongue:

But yes lens's are more important than bodies when it comes to sharpness, contrast & overall pic quality.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...