Jump to content
SAU Community

Recommended Posts

Just wondering if I could get an opinion on the system I am buying for my 'line:

Stage 1: (Now)

Head Unit: JVC KD-LH2000 w/MP3

Front Speakers: VDO Dayton HPC1700 6" splits

Rear Speakers: VDO Dayton HSP1721 6.5"

Stage 2: (Soon)

Sub Woofer: JL Audio 12w3v2d4 12"

Amplifiers: Coustic 401DB (Monoblock)

Coustic 481QE

I am looking for sound quality over loudness and i think these are some pretty good choices but I am open to any suggestions/comments before I take the plunge.

-Max

Link to comment
https://www.sau.com.au/forums/topic/10598-thoughts-on-my-system/
Share on other sites

Agreed. There's lotsa good electronics out there, but only a handful of primo speakers. If you value accurate sound reproduction above all else, check some Euro brands like Focal, DLS, Dynaudio. Boston Acoustics are good too. Believe me it's well worth spending dough on speakers.

So the top of the range VDO's are no go? I've listened to them and they sounds pretty damn great, plus I should mention that the whole system is meant to cost less than $2500 including wiring (which this does)

Well for $3000 I just got installed (on Thursday):

* Pioneer deh-p8450mp deck

* Boston Rally 620 splits

* Boston FX6 rears

* Clarion V-Net 4 channel amp (for speakers)

* 12" Rockford Punch HE sub

* Rockford f200 amp (sub)

Went to Lifestyle at Norwest. Those guys are awesome and actually seem like they care what happens to the system. Highly recommended, although their installations (different site) had a bit to be desired...

Really happy with it! It's renewed the excitment of jumping in the car! ;)

i also think that you should rethink the speakers.... you could do so much better, i definitely love Boston Acoustics, Phoenix Gold, Orion etc.... all the big American names.... people have to learn that they do it bigger and better, i have used almost every brand out there and i know what i always sit down to every time that i get into my ride :D take your time with the system if need be, so what if you don't have that extra little bit of cash right at the moment, take it slow and do it right the first time. Dont try and do everything at once. maybe get a good deck and splits to start off with, maybe even a nice amp to run the splits, then work back. so what if it takes you a bit longer, at least you will have a kickass system then; rather than going " shit, i wish i had done this differently, oh well there goes my money"........ go american names, big power, clear hard hitting output.

oh, and about the LH2000, it has a 24bit Digital Audio Converter which is really cool, but only 2v preout; they spent more time on the graphics. you should be able to pick up a JVC SH707R or SH909R for only a little bit more and they have an endless list of features compared, i have used them all and love the SH series :D

hmm well there are certain things in even the low range that seperate themselves from the rest, usually depending on what features you are looking for.... eg. warranty, how many lines out, output voltage, digital audio converter, mp3, graphics, remote, etc etc.

JVC have really taken the market when it comes to well priced raesonable quality head units, at the moment no one else offers a decent quality mp3 player with remote and dcp for under about $500 (alpine starts at $899, Clarion at $859, Kenwood at $899, Blaupunkt at about $700 etc etc)

when it comes to speakers in the low end if you are looking at splits for example, make sure that you at least get a pair with seperate crossovers, not inline, they will sound much better as well as usually being able to adjust the db level for the tweeters on a seperate crossover. it just really depends what you are looking for.

as an overall outlook though, if you have no real taste for the best possible sound or comps, or just plain do not have enough money ever; then yes the lower end stuff is quite good for the money, but my point is, is you can afford that few extra dollars on any one product to get more features then it would be very advantageous to do so :)

if you have any ideas of what system you're looking at then let me know and i will see if i can give you some well priced options :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...