Jump to content
SAU Community

biggest scum on earth on Station St....


Recommended Posts

I just received my first bloody speeding ticket in the mail!!!!!

Some lowest scum aimed a camera at me Sunday afternoon 2 wks ago...... cursed $125 and 1 point for 65 in 60 zone....

I'll put the biggest curse on my money before I hand it over to those bastards.... Hope they'll crash their car or roll over the hill, whatever.... loved to see what happen to one of the Tassie cop car in this month's Motor Mag issue (last page).

If I ever find that camera...... on Station St between Darebin & Separation Sts, Fairfield....

That scum will be sorry he/she was born. I'll put a curse on that scum's name on my speeding ticket as well......

Link to comment
https://www.sau.com.au/forums/topic/10601-biggest-scum-on-earth-on-station-st/
Share on other sites

I was at work.....

Just be careful in that strip between Darebin n Separation... I'm still gonna find that camera and the car... only god can hopefully forbid me what I'm gonna do to it when I found it.....

munkeh said he saw the car once, but I reckon they keep changing the car...

I might buy a money order to pay the fine, but before I put it in the mail, I'll wipe it off my own cream in the pants before sending it off to them.....

Paying for a speeding fine can never be more fun than this!!!! What a great idea, I'm a genius! :lol:

I DID NOT vote for Bracks last yr...... n never will until he allows us all 10% tolerance as per ADR...

Meanwhile, they all deserve having my sh1t smeared on their faces. I stand my grounds!

David,

I guess you find speeding fines are just as friggin' annoying as junk mails offering porns or quick money scam scheme in your e-mail account eh....?

SPEED CAMERA OPERATORS = SPAMMERS

SPEEDING FINES = JUNK E-MAILS

Now what we all need is that Spam Filter... Road Angel, Radar Detector, Polarising No Plate clear cover, Reflective No Plates, etc.., etc...

it's not gonna do me any good as long as that scum is sitting in the same spot.... I had to go thru there to get to the station anyway, and I bet that stinky skunk will book you even you're doing 61km/h!!!! Look what doxx got 64, 2 less than mine and still cant wipe that greedy $$ drool off their slimy lips

I know what, maybe should bring a camera n flash it back at them, that'll give them momentary blindness in the eye! Better off permanent blindness hehehehhe for the sake of human race on earth.

I'm off to bed now, enough swearing for one night..... I hope I see all camera skunks die fallen out of their trees in my dreams....

then eaten by rats half alived... just like Kenny (South Park)

hahahaha rianto

i wonder how pissed u would be if u got a canary for doin nuttin wrong and had to waste your time going to get a new roadworthy and time going to vicroads to clear it!!

Is that your first speeding fine??? i got a $365 speeding fine in canberra 3 years ago for doin 30km/h over the limit!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...