Jump to content
SAU Community

Recommended Posts

  • Replies 461
  • Created
  • Last Reply

Top Posters In This Topic

yep,. that was my car but i wasn't driving.. didn't finished work till 10:30pm thursday nite.

that asswipe gone street racing in my car again.

i wouldnt call it a street race, he got dusted :( but seriously, that other 33 has sum serious poke about it. pretty stock looking aswell. roger, u gonna be out sunday arvo at all or are u working again??

Edited by 85URK
where are you working at?

:P

I work in an accounting firm. I do tax, so if any of you guys need an accountant, give me a hollar :)

---

Oh and I got all eaten up by some red r33 gts-t thurs night down alex headlands. (my poor hr31 is still sulking) I had no chance but I just wanted to see how much slower I actually was haha. Anyone on here?

I work in an accounting firm. I do tax, so if any of you guys need an accountant, give me a hollar :P

---

Oh and I got all eaten up by some red r33 gts-t thurs night down alex headlands. (my poor hr31 is still sulking) I had no chance but I just wanted to see how much slower I actually was haha. Anyone on here?

When I had my red GTS-t I tried against a R33 gtr, I didn't have any chance to but it was great fun to see the differance in performance. HAHAHAHAAHA

When I had my red GTS-t I tried against a R33 gtr, I didn't have any chance to but it was great fun to see the differance in performance. HAHAHAHAAHA

Arh but this gts-t was not stock. But not many are these days.

Are you going to meet up on sunday at alex?

I work in an accounting firm. I do tax, so if any of you guys need an accountant, give me a hollar :P

---

Oh and I got all eaten up by some red r33 gts-t thurs night down alex headlands. (my poor hr31 is still sulking) I had no chance but I just wanted to see how much slower I actually was haha. Anyone on here?

thats the one im talking about! :) it goes hard good for 11's. i wont mention his name , but hes a good bloke.

Arh but this gts-t was not stock. But not many are these days.

Are you going to meet up on sunday at alex?

I will see how I go. Have a wedding to attend in the morning, then doing some route recon in the arvo.

i wouldnt call it a street race, he got dusted :mad: but seriously, that other 33 has sum serious poke about it. pretty stock looking aswell. roger, u gonna be out sunday arvo at all or are u working again??

Yeah,.. my mate told me,. he spoke to the guys that owns it..some serious stuff going on inside engine bay,. was pretty quick he said.

maroon stock looking r33gtst...the supra kept up,. was only about half a car length till he wind the boost up and gone for about 2-3 cars length ha ha ha.

i work till 4 on sunday... i will cut some lap after 4 thats for sure... i'll see u around perhaps.

Yeah,.. my mate told me,. he spoke to the guys that owns it..some serious stuff going on inside engine bay,. was pretty quick he said.

maroon stock looking r33gtst...the supra kept up,. was only about half a car length till he wind the boost up and gone for about 2-3 cars length ha ha ha.

i work till 4 on sunday... i will cut some lap after 4 thats for sure... i'll see u around perhaps.

saw your car out with nathan in it again, then i think i saw u driving it or it mite have been your other mate .... i dunno, i give up trying to guess who's driving your car these days, how about if u are out just give me a sms if u see me, thats heaps easier lol if u got that zorst still i mite have to have a look at it.

No worries baysideblue.

yeah,. it wasn't me again drivin.. but the 2nd one must have been me.. how come i didn't see you ? i just went to see my bro down at Alex.. didn't really went lappin as i finished after 4 already.. theres no much cars around though that afternoon..

will buzz u the next time im out aight.

and yes.. i still have the kakimoto.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...