Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 4 weeks later...
How do the eyelids attach?

Is there any different method of spraying the bending plastic?

2 or 3 drops of urethane will hold the eyelids on & there is no special method of painting or paint. the product is still fibre glass just more flexible.

David Bradley

MFX Auto Styling

www.mfx.com.au

(02) 4628 4421

4/60 Blaxland Rd

Campbelltown, NSW 2560

Link to comment
https://www.sau.com.au/forums/topic/106194--/#findComment-2056158
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...


  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
×
×
  • Create New...