Jump to content
SAU Community

Recommended Posts

hey guys and gurls .. i need new rear speakers for r33 series one.. im pretty sure they fit 6inch ??? correct me if im wrong.. i need to get new speakers... but im after sumthing good that will sound as loud as 6x9's ..

Anyone know any models and brands??

wait...

the stock rear speakers are 6ich?

why do i have 6x9s in mine? i HATE 6x9's... they sound so shit in comparison to a 6inch...

i never really looked, plus they have covers over them... im gunna check that out...

PS: i only hate 6x9's cause i normally run a lot of bass, so i dont need any more...

yeh any 6 to 6.5 inch speaker will fit.

being loud will come down to a few things such as what you run the speakers off how much power (wrms not just watts) and the sensitivity.

eg head unit will be about 16wrms depending on brand etc etc. if you run them off an amp that is 100wrms the amp will not distort at the same level as the head unit.

sensitivity has a part as well if your speakers have a sensitivity: 89dB/Wm a speaker that has a sensitivity 91db/Wm needs less power to produce the same sound as that with 89db/Wm.

i hope this helps mr 32

NOT JBL 6.5"!! I finally got around to putting my old amp in the car, and these new 6.5" speakers are terrible!

I'm going to pull them out and put Jaycar's kevlar 6.5" woofers in there, then run them off the amps crossover. Hopefully I won't need to put my sub in the boot!

i forgot the model number but i got fusion 6.5"ers (3 way) and i had kenwood kfc somethin 6x9's and the fusions crap all over for sound quality, loudness everything, i wish i could put them in my front doors but they are a bit too deep and i dont wanna resort to pods in the doors

ben...

I just replaced mine... you'll be looking for 6.5" speakers in the rears, and you'll be looking for 6" in the fronts.

I had to make a custom bracket for my rears 'cos I had 6" Polk's for my rears, and they were a little too small to fit in the stock plastic bracket... and I had to cut the front mounting brackets to fit the fronts!

Sound SO much better now. The stocks were 8w Clarion speakers, with NO surrounds. They'd eroded completely.

Yet to put my sub back in... gotta make myself a custom boot floor before I can do that though.

Hi Ya

If you are still looking to buy speakers for your R33. I have 2 pairs of near new Alpine 6 1/2 in Coaxial 2-way speakers 90watts Peak Output.

They cost me $299 a pair and I thought a fair price would be $150 per pair if you are interested.

I had them installed in a R33 GTR for about 3 months and this was the biggest I could install in the back.

If you are interested I can be contacted on 0407 883 263.

Regards

Duane

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...