Jump to content
SAU Community

Recommended Posts

Ok so who is in ???

Getting guards rolled tommorrow or wednesday morning so if the weather holds up ill be there.....

The last time I went I popped my cherry at drag racing...and only managed a 13.9......and that was running intermediate boost due to misfiring from dieing coil packs.

Armed with splitfire coils and able to run high boost.....hoping for a mid to low 13 :lol:

Anyways hope to see a lot of lines there !!!!

Ill be in the black 34 with 3 letter plates so come over and say hi....

Link to comment
https://www.sau.com.au/forums/topic/106569-wsid-22nd-feb/
Share on other sites

Yeah.I knew about the 12.6pb

So benm ran a 12.8 hey.There is plenty more left in that car ben!

finally a 12 Benny....why didn't ya do it last week when i had the cash on ya?

BTW Stace still 0wns ya by nearly a whole second!!

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/106569-wsid-22nd-feb/#findComment-1973154
Share on other sites

hahahaha.. stace is untouchable ;)

i ran a 12.7 :) yesss!!!! i'm an idiot though!! figured out why i was only running low 13s towards the end of the night <_< oh wells.. next week! :)

benm did a pb of 12.7 :)

dave - to4gtr did a pb of 12.5 :)

and thomas as having a few issues... don't think he was happy with his runs but he'll be back out there nexty week :)

Link to comment
https://www.sau.com.au/forums/topic/106569-wsid-22nd-feb/#findComment-1973491
Share on other sites



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...