Jump to content
SAU Community

Recommended Posts

Yup finally into the 12's!

The clutch bleed made things much better however still not 100% so their is certainly more time in it just a matter of me figuring it out. I did my pb racing against Dave which certainly helps having someone beside you in identical car with similar power. I fell asleep at the lights and then tried to chase him down but his midrange is too strong for my top end.

R/T - 0.469 (PB: 0.035)

60 - 1.746

330 - 5.387

660 - 8.359

MPH - 81.25 (PB: 84.68)

1000 - 10.796

ET - 12.785

MPH - 112.22

KM/H - 180.61

Special thanks to my pit bitches 2rismo and Buster :P

hahahaha.. stace is untouchable :)

i ran a 12.7 :) yesss!!!! i'm an idiot though!! figured out why i was only running low 13s towards the end of the night <_< oh wells.. next week! :D

benm did a pb of 12.7 :D

dave - to4gtr did a pb of 12.5 :blink:

and thomas as having a few issues... don't think he was happy with his runs but he'll be back out there nexty week :)

What was the problem holding you backs??

yay, all i need now is a damm tune :) i dont like running 13 psi at the runs.

r/t: .373

60' 1.911

330' 5.337

660' 8.142 mph: 87.74

1000' 10.547

et: 12.587 mph: 108.66

i was doing 12.8/9 all night. then fried the clutch, then it slipped abit so i could boost of the line abit.

i miss my stock gearbox,pitty about the synchros (190000kms old :D ) i was doing 1.7 60's in it. stupid tall first gear

i had fun, just a shit getting of the line with a first gear that does 85k's, more power perhaps :lol:

anyways, she didnt go bang, all practice. haha



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...