Jump to content
SAU Community

Recommended Posts

Recently had a short circuit (sub box connections loosened>touched>blew a head unit connections making it go pop badly on powerup).

:) Anyway, that's fixed, but the auto-elec said my battery might be gone cos while working on it with the key in the accessory postion and engine off, it died after about 10-15 minutes. They said it should last a coupla hours at least if the stereo isn't on. Annoyingly, they didn't say "you need a new battery" or "we should check the rest of the system for grounding" etc... u know what I mean? Couldn't give me a straight answer ;)

So now I'm worried cos I'm about to get my stereo upgraded and if the car's struggling to hold charge 10 minutes then I want to fix that first. I already jump out of the car and lock it real quick out of paranoia :D

So I'm gonna check the battery manufacture date. How can I tell how long it is into it's life? I read some batteries last 2 years, some 4.

If the battery isn't long in the tooth, I'm gonna check what the nominal amp being drawn from the battery is while I'm parked. I read it's supposed 50mA (plus whatever the boot light draws if on). Is that correct? Roughly same for all cars? Mine's a '96 R33 GTST.

Also, the auto-elec said I need a "sealed" battery. That's what's in there at the moment. Somewhere else said that's a load of hooey. What does everyone else have? The battery in there at the moment looks a lot smaller than the seat/frame it's sitting in. I think there's meant to be a larger battery there... After checking there's no crazy draw on the system while off (and fixing that if there is), if I need a new battery, what's the biggest/longest lasting one that will fit in an R33 2 dour?

BTW, the audio system isn't anything crazy, so don't think I need a second battery etc. It's a 700W rms 4 channel amp, off a JVC head unit with focal splits and a 10" sub.

you answered most of all your own questions there buddy . the autoelec should of told you so you stop guessing your self . if its been in front of an AE then he could tell in 1 second if the battery or Alternator is fragged .... it is!!!, i can tell by what your saying ... replace it and forget about it hassling you ......i went the biggest fatest exide that would fit and repaced terminals with contact luggs ... not a hicup now !!!

mine was the same, came with jap battery .... there ok until you slowly drain the old one of power somehow (bootlight stereo etc) and they seem to cross a cell making it a 12 volt battery still but no staying power .....

lol jap batteries are crap thats all there is to it. if you wanna run subs n all that shit off your car with a jap battery and dont expect it to go flat after having it on accessorices for extended periods of time.... your dreamin

ishh: The auto electrician I dealt with when picking up the car was some mongrel obviously in a big rush (for *#& knows what reason, it wasn't lunch or the end of the day), and he barely spoke a word of english, hence me walking away without a clear answer simply cos I couldn't understand him and noone else was around.

JaR: Who said anything about a jap battery? From memory I don't think it is jap. And I said I jump out of the car real quick... obviously I'm NOT sitting in the car park with the shit running and the engine off.

Thanks so much for the genuine non-sarcastic help...

1. most cars have batteries that are really old. Why not replace it if it's 5 years old?

2. batteries are cheap. head to our group buy section and pay 140 for the sealed battery from wrxhoon and be done with it. You won't have to worry about battery again.

3. stop stressing, it's only a battery. it's only 140.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...