Jump to content
SAU Community

Recommended Posts

Noltec Rear subframe mounts

I will be commencing a group buy as of now for the following items :

N92447 - R32 & R34 rear subframe mounts

N92446 - R33, S13-S15 Sylivia, 300zx Z32 rear subframe mounts.

These are replacing the rubber / silicon filled rear mounts that wear over time and cause movement in the rear subframe.

My r32 is a street driven car and under load (on boost) you can feel the rear end sort of squirm around.

People normally fit the alloy type rear subframe bush, which just crushes down the factory worn item, resulting in increased vibration, and noise through the car as the cradle is now metal on metal.

You can fit these noltec items, and still fit the typical "pinapple" urethane type bushes to angle the cradle for drift or traction.

below is attached an expalnation of what i mean.

Fitting of these can be done in two ways :

1. workshop can fit for you

2. remove rear cradle yourself, use a holesaw to cut out old bushes, then whack these in.

Or do a search :D

Noraml RRP on these is $266 from Noltec.

If we can secure 5 buyers for each, i can do 1 set (4 bushes) for $155

Im in Adelaide, so pickup is available or postage will be +$6 around Australia.

If more than 5 order i will place the first 5 order in straight away, and start a new list then the next list will wait till i have 5 on that one and so on.

End date : 2 months from now = 21-4-06

thanks ;)

post-3692-1140498314.gif

Link to comment
https://www.sau.com.au/forums/topic/106735-noltec-rear-subframe-mounts/
Share on other sites

  • Replies 181
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

hmm i kind of get the picture of how these are fitted do you know of any links to show how to fit them>? i was going to get some pine apples (otomoto BEE R ones) as well might as well put me down aswell for r32.

cheers simon

Edited by gt-t_r34
none for R31 GTS-X?

Noltec dont list them in their parts list i have. sorry :P I can get other stuff for the r31 though.

Im in Adelaide I will take a set for the S13 what do I need to do, any deposits needed and when will I be able to get them?

Ill add your name to the list, and when i have 5 orders i will ask for payment, then i can place the order. Once i have them, i will let you know, and you can pickup or i can post.

So if you know anyone else with a s13-s15 or r33 tell em to buy a set, and i can send the order off when i have 5 orders

dunno what the deal is, the r32 and r34 use the same replacement, but r33 uses the same as s13- s15 and z32.

I could email the supplier and find out if your really keen :P

Yeah that would be cool - if it's not too much hassle.

I've purchased these mounts (pictured below), and have been told they fiy S13/S14/Z32, I assumed they would fit my R32 as well. If it looks like they wont, I may have to jump onto your group buy.

Ryno

post-3204-1140755014.jpg

Those black ones, look like a solid metal replacement for the std rubber bushes.

If they are, it will be a noisy ride :D

Dont know if they are the same as the ones Noltec sell. What are they made of?

The advertising for them states: "They are machined from virtually unbreakable Duravar® UHMW Polyethylene. These mounts are much harder than polyurethane or rubber and will never wear out."

If they fit my car, they should work well... They have no metal parts to them, so they should have minimal road noise.

B1- i can get any parts that Noltec offer for around 20% off their retail.

If i can secure 5 orders of the same item i can get a total of 40% off.

For the rear they make upper control arm bushes (camber kit).

Fronts they do control arm bushes, radius (caster) bushes/rods, engine mounts etc.

Let me know what your interested in :)

edit/ i'll look into doing another group buy this week containing control arm bushes and camber kits etc.

Edited by Bl4cK32
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...