Jump to content
SAU Community

Recommended Posts

there were like 4-5 hachi-roku's too (AE86)

Suprisingly some off them went pretty quick.

S13-Angel - lol i told my friends that was a chick driving that silvia but they wouldnt believe me .... go figure

showing the boys how its done. besides the rex's and the GTR u would have been one of the fastest imports there... congrats

Psiker

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

lol no i dont have neons.

i was looking at some once though. then thought nah :(

When i say rice btw paul. im talking a dumped on its ass lancer with skirts and front and rear bar less than an inch from the ground

he had 13" rims.... it smells like rice to me :D

Yes it is good to finally see some AE86's having a go. look like absolute sleepers ay.

Psiker

eheh yeah. he thinks its a bit faster than what it is. but at least he isnt dissalusioned and thinks that putting a kit on it will make it go faster like most of these eunichs do.

Must say though hes more of a fan of the new style lancers than me though. hes even really considering a turbo conversion with all the trimmings. instead of ricing it up too much.

i would rather spend the 15k for a new lancer and use the money to buy a older but better GSR for only a few grand more

Psiker

Hai all this is my 1st post to the skylines board ... btw i'm chrisroi's son, yes i got some good photos tonight of some rather nice little cars and even say kym's car run faster than 15 =P

well i will get around to make a little bit of a web site for these photos and movie of got boot's burnout if i get off my ass i'll have it done buy 3am (need ftp progy) :(

eh we'll see but yeah just like to say hi to every one i have met a few of you's all ready (bully, got boost, kym, psiker) so yeah hi

--Marc

hmm it seem my last post went a miss ......

anyway i said typed it once i can type it again

hi this is my 1st (2nd post) to these forums for you's that don't know me i'm chrisroi's son (one of 3 the best one i would say :(...)

anyway good drag meet tonight 19/2/03 few guys turned up i got to meet some new people and take some good photos and video

i'll get a bit of a site up @ a later date but for now the best pics of the night (or so i thought) can be accessed from below also there is a movie of "got boost's" r32 doing a nice little burn out off the line it's about 3.7mb so not a huge download. over all a good night enjoyed by all even kym running some decent times sorry kym i didn't get your best time on cam because we were leaving but hey @ least u proved your car aint that bad after all =P

http://www.westnet.com.au/optic_4ce/skylin.../boostingit.mov

http://www.westnet.com.au/optic_4ce/skylin...s/gotboost1.jpg

http://www.westnet.com.au/optic_4ce/skylin...s/chrisroi1.jpg

http://www.westnet.com.au/optic_4ce/skylin...s/chrisroi2.jpg

http://www.westnet.com.au/optic_4ce/skylines/kym1.jpg

http://www.westnet.com.au/optic_4ce/skylines/kym2.jpg

ok well all those links should work

have a good one

-Marc

YES! 14.53 @ 156.9km/h which i'm absolutely stoked with!

Still overfuelling like a bitch tho' AFC - here I come! 0.5sec improvement! (was consistantly getting 15.0 flats before)

Most Importantly I have my launches now at 2.3sec! better than previous 2.45 attempts. So it's getting there!

S13_Angel - saw you on the freeway yesterday arvo on your way to the drags... saw your chicky passenger looking back and smiling at me! *wink *wink*

But if i'm not mistaken that 13.1 pass you did, you weren't driving?!?! (correct me if im wrong)

Sean (GOT BOOST) ran a 13.8 by memory (stock turbs)

oh yeh, thanks for the advice about launches buddy!

Originally posted by OptiC

sorry kym i didn't get your best time on cam because we were leaving but hey @ least u proved your car aint that bad after all =P

Nice to meet you Marc, Chrisroi and Mrs Chrisroi!

Mad props for the photo's Marc, I'm usually the little photowhore at the drags... good to have a rest.

Originally posted by adam 32

*Shitting when a r32 rb20 gets a big turbo*

haha dont worry. ive got a big t04 on my R32 and its doing bugger all as far as times go!

Something about having "usable boost" not just a HP Hero eh?

What's your best time so far adam ?

14.4 is my best so far at 109mph

its got loads of power over 5000rpm but thats really not impressive except on a dyno

im in the process of rebuilding it, and putting a smaller exhaust housing (0.63) on it. which should help things a bit, anythings better than the 1.06 ive got on there now!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...