Jump to content
SAU Community

Recommended Posts

Hey guys/girls

When i brought in my R32 GTR in a container just recently i brought in a heap of parts too...as follows:

S14/S15 Tein adjustable coilovers (REARS) - $400 VERY GOOD CONDITION, WORKING, JUST NEEDS THAT KEY TO ADJUST (or u can improvise with some common tools)

RX7 Series 6 Driver's side door (black), complete - $300 (with mirror $380) IMMACULATE CONDITION

Skline R33 series II Driver's side door (silver/gunmetal) - $350 (with mirror $400) IMMACULATE CONDITION

WRX MY98 Driver's side door (silver/gunmetal) - $290 (with mirror ($350) IMMACULATE CONDITION

Original Nismo complete exhaust (all pipes) from front to back $450 VERY GOOD CONDITION, no rust, no leaks, no holes :domokun:

MOMO Steering wheel (part wood part leather) comes complete with horn attachment - $250 IMMACULATE Condition (will take off gtr and replace with stock gtr steering wheel).

R32 Stroke shifter - $90

******PRICES ARE NEGOTIABLE*****, i would consider trading some parts for like clean R32 GTR seats (front and rear) or a vertex body kit... or someone to powdercoat my rims white ;D

I live in inner city melbourne, also go to monash uni caulfield in case u see me around, i've got the blue r32 gtr, just tap me on the shoulder and ask.

CALL ME (Azza) on 0415141766

P.S i'll put up pics tomorrow :D

Cheers guys

AZZA

Link to comment
https://www.sau.com.au/forums/topic/107068-heaps-of-parts/
Share on other sites

hi

when u typed in "R32 Stroke shifter - $90" .. do you mean short shifter and is out of your 32gtr... if not do u know if its for a 32gtr?

yeah short shifter & sorry dude just got a call, its sold. Guys, can u not call me at this hour, i like sleep... :domokun:

Link to comment
https://www.sau.com.au/forums/topic/107068-heaps-of-parts/#findComment-1976508
Share on other sites

hey guys,

got some pics up of some of the parts - just been really busy

sorry bout the shoddy camera work, i'm not the best photographer out there

untitled0qw1.jpg

untitled29np.jpg

untitled37df.jpg

untitled40df.jpg

untitled53gp.jpg

NEW ADDITION TO THE SALE LIST:

Some GT Wing, dunno who's it made by, but its in top nik, and i'll sell it for $50 (not negotiable)

untitled62dh.jpg

untitled79ue.jpg

MORE PICS TO COME!!!

JUST TO GIVE YOU A HEADS UP:

I'VE RECEIVED NUMEROUS OFFERS, ALL BELOW PAR:

Exhaust: offered $330 will not part for less than $400

Doors: Will not part for less than $300 for the entire skyline door (THAT INCLUDES ALL THE ELECTRICS, WINDOWS AND MIRROR!!!!!!!!!!!!!!!!!!)

TEIN ADJUSTABLE COILOVERS WILL NOT SELL INDIVIDUALLY!!!!

Link to comment
https://www.sau.com.au/forums/topic/107068-heaps-of-parts/#findComment-1980742
Share on other sites

NOTE

*******************

I WOULD BE MORE THAN HAPPY TO GIVE UP PARTS IN TRADE FOR LABOUR ON A RESPRAY OF MY BONNET AND OR FRONT BAR AND OR REAR BOOT (I'll PAY FOR THE PAINT)

OR

POWDER COATING MY RIMS WHITE

ORRRRRRRR

MACHINING MY ROTORS (obviously not the most expensive thing to do, but still, i'm open to suggestions :P)

THANKS GUYS

Link to comment
https://www.sau.com.au/forums/topic/107068-heaps-of-parts/#findComment-1980787
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...