Jump to content
SAU Community

Recommended Posts

Noone can tell me why Exedy clutches don't fit series 2 R33s! I've asked 5 people selling all sorts of Exedy clutches, but they don't know. At least everyone is honest and doesn't remove the "R33 92-95" bit.

Some guy on eBay just replied to me with "it will fit". Rather contradictory!

Does anyone know why Exedy clutches all claim they'll fit up to 95 models, but no later?

Are series 2 R33 clutches opposite to the series 1???

And then why is it only Exedy clutches that claim this. (i've seen 6 new clutches advertised, and each seller pastes that text in their description)

Randy,

I am not sure who told you this but i just bought one from the following

http://www.skylinesaustralia.com/forums/in...showtopic=98588

and had it fitted a week ago and the place that did said it went in fine no problems at all.

Edited by leech_

LOL!

And thanks... I've seen 6 different people (3 on SAU, 3 on eBay) post up Exedy button-clutches, and the description always says something along the lines of "R33 up to '95".

It's just weird that they all got this info from SOMEWHERE (suspect Exedy site?) and pasted it up.

hmm that is odd... all i know is my clutch is in and working fine :) maybe monday call exceedy/daiken direct and ask them

LOL!

And thanks... I've seen 6 different people (3 on SAU, 3 on eBay) post up Exedy button-clutches, and the description always says something along the lines of "R33 up to '95".

It's just weird that they all got this info from SOMEWHERE (suspect Exedy site?) and pasted it up.

Me? No. I never said they didn't. I'm just asking why so many other people say they don't.

Check the for sale section for exedy clutches if you want to ridicule someone.

Hey Guys

I would really like to kill this rumour once and for all, the pull style clutch was not introduced into the none GTR range until the R34. All previous GTS-ts, including the R33 GTS25-t, use the same push setup. Also all R32 GTR manufactures until March 1993 also used an interchangeable unit.

If anyone wishes to put this to the test this, with a clutch purchased from us, and I am found to be wrong I will offer a 110% refund. This offer will stand until I have egg on my face :biggrin: If you wish to take the challenge then head over here to look at the clutches available. Unless stated SAU members can take 10% off the price. I can be contact via either PM, email or phone 0400797687.

Regards,

Andrew Sullivan

Kudos Motorsports

That's a bold statement, and i'm willing to believe it because a few people have actually bought and used Exedy clutches in their series 2 R33's.

I have found Greg to be correct also, finding a lot of proof that the series 2's are the pull-type.

Mechanically, I'm not clear as to where the pull or push originates. My clutch slave pushes on the fork, witch then pulls the pressure plate away from the friction plate. It looks to be the same as my mates R32 GTR... so i'm at a loss with that!

It's a bold statement, but I would make it if I wasn't sure I was correct. Following are the clutch engagement setups for both early and late model R33 GTS25-t and the R34 GT-t. Please take note of the position that the bearing carrier is seen. You will notice that in a pull setup (R34) that the bearing carrier is on the rear of the clutch fork while in a push setup its on then engine side. Also note that there is no difference between the R33 setups.

r33_0893_0195.gif

r33_0195.gif

r34.gif

The offer still stands if anyone wants to try and prove me wrong.

So you're saying that they are both push-type.. both series1 and 2?

In which case I really don't understand why a lot of people advertise Exedy clutches for R32 and R33 series 1 when they infact fit series 2.

=-o

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
    • Hi Jasmine. How's the war going?
×
×
  • Create New...