Jump to content
SAU Community

Recommended Posts

Have an R32 GTR with around 330kw atw and want to make it more like my evo which by comparison is heaps easier and safer to drive. At the moment the skyline isn't very predictable what with the 4wd cutting in very sudden and late. I've heard of ppl modding the sensors to create a permanent 60/40 split. Anyone got any info on how to do this? and will it be safe for the clutch/gearbox?

Link to comment
https://www.sau.com.au/forums/topic/107644-making-r32-gtr-full-time-awd/
Share on other sites

it would kill your transfer case after a while i think. If you get an aftermarket torque splitter, you can dial in 40/60 if you wanted it that way. I only ever put in 20/80 but that was just to see how it worked. Doesn't Duncan's attessa controller work like that? I didnt read through the whole thing, too many pages! hah

Does anyone else have problems with the rear end trying to step out when on wide open throttle in a straight line, dry road?

I'm pushing 330awkw and for the first few km's my torque gauge will show up to about 10-20% to the front but after everything has warmed up (bout 5km) it never ever moves from rwd. That's with tein suspension and very very worn 255 tyres.

The only time apart from the first few km that my torque gauge moves is going up the gutter of my driveway and in the wet when i'm hammering it.

Have an R32 GTR with around 330kw atw and want to make it more like my evo which by comparison is heaps easier and safer to drive. At the moment the skyline isn't very predictable what with the 4wd cutting in very sudden and late. I've heard of ppl modding the sensors to create a permanent 60/40 split. Anyone got any info on how to do this? and will it be safe for the clutch/gearbox?

have u got a hicas lock bar? this make em alot more predictable. I think I saw some atessa controllers for sale in the group buy section.

most ATTESA controllers will allow you to set the maximum torque split, not the minimum torque split, which is what you want to do, effectively forcing a 50/50 torque split 100% of the time.

The ATTESA controller works off simple signals, so find the one that indicates traction loss at the rear wheels, then feed the ATTESA controller that signal constantly, and you'll have permanent AWD.

I can't imagine it being too healthy on the car's drivetrain though, as an Evo is designed to be a permanent AWD, wheras the GTR is a switchable RWD to AWD system. System developed using millions of dollars, vs $100 ATTESA controller :pinch:

330kw atw and it steps out in a straight line? Are you talking about launching hard in 1st gear? or what gear?

Mines not as bad as you make it out to be. Does your Evo have 330kw atw? :cheers: Maybe thats your problem :D

I agree with funky.

jimbob

i would put money down that your 4wd system is not operating correctly!

i had the same problem(r32gtr) with traction in 1st and sometimes 2nd gear accelerating in a straightline it would step out or just bounce of the limiter, that was with approx 350 kw's @ 4 wheels.

i have more power now and no traction issues in a straight line.

it can be a number of things wrong , pm me if you would like some ideas.

cheers russ

btw man after my own heart, i have an evo9 too, mine is silver.

Edited by giant
  • 1 month later...

I understand that the Skyline transfer case is not intended to send torque to the front for more than 12 to 18 seconds at a time. This is not a rally car like the WRX, but a track car. (If you break traction for more than 15 seconds you've got other issues!)

The multiplate wet clutch controlled by the ATTESA computer generates heat and will damage itself if it's working all the time.

Cheers,

Dan

Have an R32 GTR with around 330kw atw and want to make it more like my evo which by comparison is heaps easier and safer to drive. At the moment the skyline isn't very predictable what with the 4wd cutting in very sudden and late. I've heard of ppl modding the sensors to create a permanent 60/40 split. Anyone got any info on how to do this? and will it be safe for the clutch/gearbox?

This isnt the best idea but works well, put higher profile tyres on the front and it will be constantly showing about 10-15 on the torque split.

I noticed this after drifting in rear wheel drive mode making the tyres bald then putting awd back on, it stays constant awd...lol...

Do that in reverse and the awd will almost never come on with higher profile tyres on the back until big wheel spin..

Of the different electronic torque split controllers out there, the one i decided to go with was the Field torque controller. It simply allows you to adjust the speed that the ATTESSA system works, it doesnt simply over ride or replace it. You can adjust the electrical signal to the ecu to enable it to react more to your likeing, and can be set up to make the 4wd come in much sooner, rather than it running 4wd all the time.

What exactly does the HKS ETC and EDA do then?

The ETC allows you to dial in different front torque splits. It will be CONSTANT until you change it. For instance you can run 20/80 all day long if you want. It goes from 0 to 50 but 50 is not recommended.

EDA is an add on that allows you to choose what torque split you want til you hit a desired speed and it goes straight to RWD mode (hence the 'drag' part of the name)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...