Jump to content
SAU Community

Recommended Posts

Hey everyone,

Can anyone recommend a trusted performance work shop that does pre-purchase inspections on japanese performance cars?

Possibbly in SE melbourne area.

Thanks

Good question. I got RACV to do the full test on Line im looking at... the works with hosting the car up etc. *Fingers crossed*

Im actually going to look at a car this week aswell and i was thnkin the exact same thing... where can i get a full inspection of the car done??????

I got RACV to do the full test on Line im looking at... the works with hosting the car up

where did you go for that?

do they have a workshop you can take it to??

how much is this going to set you back??

anyway hope it all goes well for you, goodluck with the car :laugh:

if anyone else knows of a place i'm sure we'd all like to know about it

i just went through this, it's a pain in the but. i used racv, the only thing is they wouldnt come out to see it, cos its an import or something, anyways they'll only do a comprehensive check, set me back $215. it can get expensive if they dont pass, the first one i got checked out didnt. if its a black series 2 in the malvern area pm me lol

Im actually going to look at a car this week aswell and i was thnkin the exact same thing... where can i get a full inspection of the car done??????

where did you go for that?

do they have a workshop you can take it to??

how much is this going to set you back??

anyway hope it all goes well for you, goodluck with the car :/

if anyone else knows of a place i'm sure we'd all like to know about it

Well I booked it so they are doing it tomorrow, then fax the details the next day.

I rang via their direct number and got connected to the department. The car is in Dandenong so they the nearest RACV place is at Cheltenham... the car yard guy has agreed to drive it there on Wednesday... although the car is not complianced yet.

Im an RACV member so it cost me 215... but they should do a major test... host it up etc, for non mbers its closer to 280.

Ill let you know at the end of the week how it all goes.

Edited by Sir-D
Well I booked it so they are doing it tomorrow, then fax the details the next day.

I rang via their direct number and got connected to the department. The car is in Dandenong so they the nearest RACV place is at Cheltenham... the car yard guy has agreed to drive it there on Wednesday... although the car is not complianced yet.

Im an RACV member so it cost me 215... but they should do a major test... host it up etc, for non mbers its closer to 280.

Ill let you know at the end of the week how it all goes.

what car yard? power rd? the guys at cheltnam did 2 tests for me, they check everything, even picked up some body repairs that i couldnt see.... plus they'll pick things you might not notice in a test drive

Well I booked it so they are doing it tomorrow, then fax the details the next day.

I rang via their direct number and got connected to the department. The car is in Dandenong so they the nearest RACV place is at Cheltenham... the car yard guy has agreed to drive it there on Wednesday... although the car is not complianced yet.

Im an RACV member so it cost me 215... but they should do a major test... host it up etc, for non mbers its closer to 280.

Ill let you know at the end of the week how it all goes.

i actually went out to pick up the report, that way the guy that did it can discuss it with you and point things out...

good luck...

Edited by morgsj50

My old man once bought a car after having it "RACV inspected" and they missed a whole heap of stuff and the car ended up being a lemon. Better to take u car to an import specialist. Theres quite a few in the SE region, kangaroo rd oakleigh is one but there are others that i can remember off the top of my head.

I had Nizpro do the pre purchase inspection on my car.

Cost was $250 and included a road test, full mechanical and suspension/brake inspection. Body/chassis inspection.

Leak down and compression test along with a power and air/fuel ratio test on the dyno.

I thought it was expensive at the time but after seeing that RACV want over $200 to scratch there heads I guess its a bargain.

Do RACV do a leak down?

My old man once bought a car after having it "RACV inspected" and they missed a whole heap of stuff and the car ended up being a lemon. Better to take u car to an import specialist. Theres quite a few in the SE region, kangaroo rd oakleigh is one but there are others that i can remember off the top of my head.

I was unable to get my friend mechanic to look at it as he has a workshop in Brunswick but the car is in Dandenong. But after RACV check the car and if they OK it, ill take the car to him and do another inspection to confirm what they said... if anything is dodgy its back to the car yard to fix the problems or money back.

Edited by Sir-D
I was unable to get my friend mechanic to look at it as he has a workshop in Brunswick but the car is in Dandenong. But after RACV check the car and if they OK it, ill take the car to him and do another inspection to confirm what they said... if anything is dodgy its back to the car yard to fix the problems or money back.

Thats it, also make sure u do a leak down test, prb the most important one

Thats it, also make sure u do a leak down test, prb the most important one

Well the report came today... there is a need to catalytic converter to be changed (i think its cos of Australian compliance) also the engine has oil leaks which needs immidiate attention according to RACV. I told the car yard and they are meant to fix it up this and next week. I told them unles they fix it Im not getting it. Shoukd I bargain on the price now since theres a few things wrong with it? Also it drifts slightly to the left when driving so wheel balance is needed.

Leak down test is to see what leaks like the oil??

i'd be careful, the car yard is gonna fix it as cheap as they possibly can... depending on what else is wrong, i'd probably be lookin else where, but, at the end of the day it's your money...

Yeah I will have to get it rechecked by RACV again, its like 75 bucks. Also the car has 12 month warranty as long as you service every 6 K and no engine mods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...