Jump to content
SAU Community

Recommended Posts

  Madaz said:
yeah quiet often im not there BUT im there now if it any conselation

zest is a legit website ive seen this advertised on GA forums u play COD2 much iceduck

i only got my copy this week

Nah mate.. I dun play it much at all.. I prefer the game play in bf2...

I suck at cod2

lol

anytime ur up for a game give me a yell.. iceduck_312@hotmail.com

COD2 isn't all that good peeps.

It plays to consoley for my likings. I'd say due to the fact it was developed on XBOX360 at the same time.

It's kinda like Deus Ex 2 was. It was developed for both pc and xbox and just was no-where near as good as the original.

The last truely really good FPS was without a doubt Chronicles of Riddick. So underated and even though it was an xbox game it was sooo damn good on PC.

And you should all listen to me cos i know more than any videogame store in the world about this stuff.

Not trying to toot my own horn but when it comes to games and computers i know far too much.

Still waiting on it, been a few years looks damn nice from what i saw of E3 fottage last year.

The current release is September this year. THQ (the publisher) have a copy now and are testing it and will make susgestions if they think anything needs to be changed. If it isn't out by september they then say it won't be till 2007 which would suck. I hope it comes out.

You wanna talk vapour ware look at Duke Nuken Forever.

Edited by kralster

So anyone here getting a XBOX360?

I am already paid for it getting it midnight 22nd march at colonades. Gotta drive up from victor harbor. Spent over 1000 bucks on it.

Just putting my exhaust and dump pipe futher down the line.

I already got the premiere pack with PD0 and an extra controller but i'm picking up PGR3 and another game which i still haven't decided on.

upgrading is so much fun cause u can choose parts choose retailer and then barta for better prices ...

i allways (9times out of 10) buy my parts online now

specially if i dont need the part today

go here to search every website in AUS for the cheepest part

http://www.staticice.com.au/

No i don't :down: I have my parents 10 year old one so it won't do games the justice they deserve.

My computer is running pretty damn sweet at the moment so i'm not looking to upgrade till at least the end of the year so i'm happy with getting a 360. Even though i don't have an original xbox.

Ok guys its upgrade time for me :happy:

I have built my own pc in the past, but as we all know what you know now, is outdated yesterday. So i wanna break it down, and hear what you guys think would be the best parts to buy to build a computer (ie chip, mainboard, case, powersupply etc)

Im going to be using it as mainly a pc games machine so it will need a graphics card (preferably with tv out).

Ram is easy, but what brand etc? -i know around 2 gig is good.

Basically i want it to last a few years (3?) so overclocking will be good as well.

So tell me what parts you would use, why, and the costs of each item. (i will buy online to get parts cheaper if i have to)

Ignore operating systems for now, but xp will be running. and the cable net im on now too :P

What would you build??

Edited by Bl4cK32

Bl4cK32 uve asked the impossible question ??? BUDGET???

so ill go with a modest budget of about $2000 give or take (just for the box)

feel very privlidged this is pretty much my next PC (not that i need to upgrade yet but if u know enthusiats they allways need to upgrade :yes: )

Motherboard DFI CROSSFIRE LanParty 939 socket $309

CPU AMD Athlon 64 4000+ $519.00

CPU AMD Athlon64 X2 4200+ Dual Core $549.00

*note not sure on which cpu*

Powercolor X1900XTX 512MB & OCZ Platinum PC3200 2Gb Kit 2-3-2-5 Bundle $1349 **note i have this video card and it will run anything for the next 6-8 years **

Thermaltake VC2000BNS Mambo Mid-Tower $79

Antec TrueControl 2.0 550W ATX Power Supply $179

well i think thats about it for a nice PC little over 2g but sall good $2465 ** i priced it on the dearer CPU **

and for a monitor i would get this

Philips 200W6CS 20" Widescreen 16ms Silver $869

above system with monitor will set u back $3334

i hope to get a pc very close to this later this year keeping in mind i allready have outlayed $1000 for the gfx card

to keep things in perspective here is a cheaper PC ive sold a couple of ** note only the single price cause where i bought parts from did me a good price and only invoiced me for a total cost so i couldnt break it down **

platinum: thats a nice little setup there ;)

PCquote.1470.pdfFetching info...

lol...well yer budget will help. I spose around what you are suggesting. I dont want the latest stuff that no-ones got software for yet, or sfa games will run off it. Just something thats new, with good software support and will play the games at better speeds than average :yes:

well with wot ive sugested it runs everything now and is also future proof as in its ready for 64bit Windows Vista®

as for games this gfx solution will run games @ there maximum settings for quiet sum time to come and will look very nice @ the monitors maximum resolution also

whilst it does seem like alot of money it will last 3-4 possibly 5 years depending on your gaming habits

I don't think a X1900 will play games for the next 6 to 8 years.

By that logic my old Voodoo2 card would still be going strong but thats hardly the case. You'll be able to play new games for around 4 years but you'll be turning the graphics down after 2 years or so.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...