Jump to content
SAU Community

Recommended Posts

this is a bit diff to what i thought, but easier to manage whilst vehicle is in motion i would believe

http://cgi.ebay.com.au/Asus-EEEPC-Solderle...%3A1|240%3A1318

Can you get an external HDD for these, or am i missing the link between HDD and SSD

this is a bit diff to what i thought, but easier to manage whilst vehicle is in motion i would believe

http://cgi.ebay.com.au/Asus-EEEPC-Solderle...%3A1|240%3A1318

Can you get an external HDD for these, or am i missing the link between HDD and SSD

it has usb ports so you can get external hdd's but you dont want a hdd in the car due to g-forces and shock. ssd = solid state (no moving parts) and can tolerate a lot of shock. They also draw about 1 watt as opposed to the 12-20 watts of a laptop (2.5") hdd - thats one of the reasons the netbooks can get 4 hours of use. Some of them use standard hdd's on the 1.8" scale but these too still draw a lot of power.

That link is for putting the perspect touch sensor inside an existing 901 laptop screen - loads of people have been doing this but I think this is the first one I've seen which doesn't require soldering. SO very tempting, tho it would void my warranty....

-D

OK all you 4 eyed geeks out there ;)

I need to get serious about another build using decent gear without going over the top with price.

Input would be needed and appreciated.....here's a start:

Gigabyte EP45-UD3P M/Board...................$220

Intel Q9550 2.83Mhz CPU........................$413

Corsair Dominator DDR II 1066Mhz 4Gb.......$170

ATi Radeon HD 4850 1Gb.........................$280

Thermaltake 650W 'Q' Fan PSU.................$175

Samsung 2333 SW 23" LCD......................$290

Don't pay tax so these are all EX prices.......anyone do any better or suggest different setup?

Used for office work & video editing.........hence I normally run a Stripe Raid setup.

G-B EX58 DS4....................................$339

i& 920...............................................$469

4GB Kit(2x2G)DDR2 1066 Kingston.......$95

1GB 4850 Gigabyte.............................$287

Thermaltake ToughPower 600W...........$140

monitor personally im looking at this

21.5 “ 2ms HD WS Benq E2200HD Full HD.....$238

i was pretty sure not 100% sure just pretty that i7 uses either

all prices Inc. tax

this is what my mate gets at work

317986132.png

he gets to have a server on a 100Mb link to it too that he can just use to whore on torrents

/jealous

Weird - maximum I've gotten at Hostworks was about 70mbps on speedtest.net ;) .. That said, it does seem to depend on the time of day which suggests it may be a limitation of the testing server rather than Hostworks' connectivity though ...

I would be also be very careful of your friend advertising he 'whores torrents' on this server :)

sorry your right but for a little more than the dominator ram get some Gskill

4G Kit(2x2G) DDR3 1333 G.Skill NQ..............$215

you not going to overclock so you dont need heaps fancy ram Gskill will be quite fine

Steve, just checked out that GB EX58, it's 3 way, so would need 3 x 2Gb which may get expensive to go the i7 route.

Curious to know what the 1600mhz would cost?

Does your supplier issue proper tax invoices?.......otherwise no point if I can't claim the tax back.

Also the 600W ToughPower is noisy compared to the 650W 'Q' I think.

Hi Pete

almost the same as my setup except i run a 4870 vid card and asus m/board

i've had the 9550 running 3.0 ghz on air cooler for 6 months and it is magic!

I would go for a coolermaster tru power psu that has 5 year warranty

Steve, just checked out that GB EX58, it's 3 way, so would need 3 x 2Gb which may get expensive to go the i7 route.

Curious to know what the 1600mhz would cost?

Does your supplier issue proper tax invoices?.......otherwise no point if I can't claim the tax back.

G.Skill NQ 3x2Gb DDR3 1600mhz = ~$377(excl gst) and yes his supplier does issue non-dodgy tax invoices :huh:

that's good to know Adrian......because of work files & video work I won't be overclocking as I need it to run very cool & rock stable.

I know Antec also offer 5 yr warranty but apparently Thermaltake have just gone Life-Time?!

Haha, thanks for that Patrick.....problem with DDR3 is that it's still too dear compared to DDR2 so I have to decide whether to spend the extra $$ although the i7 over the Q9550 would be very nice.

that's good to know Adrian......because of work files & video work I won't be overclocking as I need it to run very cool & rock stable.

I know Antec also offer 5 yr warranty but apparently Thermaltake have just gone Life-Time?!

Haha, thanks for that Patrick.....problem with DDR3 is that it's still too dear compared to DDR2 so I have to decide whether to spend the extra $ although the i7 over the Q9550 would be very nice.

Unless you're running games, databases or doing hardcore rendering, its a waste. Stick with a quad core system and dual core ddr2, you'll get better value for that.

Incidentally re: EEE pc's, theres a new one coming out from Nvidia which replaces the i945 graphics chip with a 9300gm 3d accelerated northbridge.

Meaning the gfx card wont be neutered and will actually render HD properly. Interesting to note that they will keep the intel atom processor as the CPU, and that the 9300GM has integrated Phys-x capability (tho I cant see many games that use phys-x running nicely on the 9300, even tho it IS a step up).

I'll be keeping an eye out. Any excuse to put World of Warcraft on a netbook and run it across nextG is a good one. :huh:

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
×
×
  • Create New...