Jump to content
SAU Community

Recommended Posts

would only need the server card on a gigabit lan, and even then its maximum overkill in a domestic setting. it would make zero difference on ur intarwebs speed.

well im on a gigabit network ,

ive got a 24 port hp pro curve switch with 6 computers plugged in and file transfers are essential considering i can transfer from one pc to another at around 85mb/sec which is better then 40mb/sec

its ur $ and like i said in what u quoted. its overkill for a domestic setting. transfer speeds are unbelievebly similar accross the price range. realistically all u will get for 1000% more cost is the server card may live longer

and care factor

by the sounds of it he has the card and is stuck with it not working in vista becuase is possibly normally meant for windows server which just happens to work fine under xp as they are basically the same

no you dont if there has been an active landline at the residence before...

most providers of naked DSL are lazy, and it makes life easier for them to get you to connect in the first place (also you pay the connection fee, so they dont have to worry about that :ninja: )

all providers of naked DSL do is buy the rights for the stretch of phonline between your house and the street, and they put the cost that they incur for that into your service charge.

it was not finacially viable for me to move to naked dsl with internode, as it would take 18 months for me to break even wih the cost of naked dsl vs landline + ADSL.

/2c

That's the thing... My new place (should get keys this week sometime) has never been lived in and doesn't have a phone # connected so I don't really want to have to pay for a # to be connected so that an ISP can just disconnect it again for naked dsl just to save paying line rental from Telstra!

as it is a new line, i dont think you have much choice...

do u actually intend to use ur landline for calls? i dont use mine, and it costs me $20/month for the landline, plus my intarwebs charges... the total is only $5 more than naked DSL.... making calls on it is a different story tho

That's why I thought I'd ask 'cause I was thinking the same thing

No

take into consideration signup costs for both landline, and the internet, it may be cheaper to do it the traditional way

there is not much cost difference then if u have homline budget from telstra (approx $20/month) + the cost of ur intarwebs.

for quality service, try internode, or adam....

if u want budget crappy service with lots of usage, go TPG :ninja:

i stand by my comment. my neighbor has TPG, and he has more drop outs and fk ups from customer service/tech support that i ever imagined possible. my service is rock solid, and we are on same exchange, and connected to the same phone pit out front. have recieved similar reports from mates interstate too. the woes of a wholesale ISP.

if ur going well with them, more power to ya. just wouldnt be my choice

My brother got a few copies of windows 7 RC from uni the other day and i thought what the hell i'll put it on my primary computer, upgraded it straight from vista and i am extremely impressed. It loads faster than vista and uses lest ram at idle. The only conflict i had was daemon tools as well so it's very impressive.

^^ i concure my mate just installed it last night on a q9450 sli rig with a OCZ ssd and he is very impressed, i was less so becuase i have already had it a couple of months :)

(thanks Luke)

its just a pity you have to pay for what should of been vista in the first place

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
    • And now the bloody flapper is jammed slightly open. Lazy as all f**k in 3rd-5th (very hard to convince it to make much boost before you run out of revs), but will make 12 psi in 1st, which shouldb't be possible with a 5 psi spring and controller set to <10 psi. Methinks I'm lucky it jammed where it did, rather than fully closed. It's actually a well weird situation. Careful examination of what's happening in the back of that housing when the gearbox comes out and all the other stuff (injectors, AFM retune) is supposed to be done, next week.
    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
×
×
  • Create New...