Jump to content
SAU Community

Recommended Posts

Dion, did you used to work at Blue Mouse?

Something that might be worth a shot, open up a command prompt and run 'sfc /verifyonly'

It checks the integrity of windows system files for any corruption and will notify if any have gone missing.

Check the event logs, both Application and System. If something on your system crashes theres nearly always a log entry about it that may have more information about the problem.

Does windows have it's own drivers by any chance? Uninstall the realtek ones and see if windows can find drivers locally or from windows update.

Problems between vista and realtek seem to be common: http://www.google.com/search?hl=en&sou...mp;oq=&aqi=

Hey guys, it's time I got into this side of things since I do electronics & am a bit of a super geek when I want to be.

I built up my own system a few months back consisting of the following:

Intel core i7 920 (overclocked to 3.2GHz)

Gigabyte EX58-UD5 motherboard

3x2GB GSkill PI 1600MHz RAM

HIS 4870 ICEQ4 Turbo

Lian-Li Silent Force 850W power supply

Lian-Li PC-P60 Gaming tower

1TB Seagate Barracuda HDD

Samsung 2494HS monitor

Logitec G15 Keyboard & G9 Mouse

Logitec Surround Sound

I built this system to be as quiet as possible & for the large part I achieved that. It looks pretty sweet too.

The graphics card can make a bit of noise when gaming, but normally you can't hear it for all the other loud noises going on.

Obviously there's a lot of upgrading that can be done with this system, but first I'll probably set up 2 HDD's in RAID 0. I like the idea of SSD's, but I would like to spend some money on the car too!

I've also found that even with a good overclock DirectX 10.1 Games can be quite taxing on the system so I am also thinking about getting a second card to run Crossfire when my card gets a bit cheaper unless ATI or Nvidia come out with a ground breaking replacement in the near future.

I'd also kill for a G25 wheel so I can start playing racing games. Tried on a friends computer & loved it :P

Edited by J_Red33
Will give it a shot :domokun:

And yes... I did. I'm hoping you're the Nick I'm thinking of or I'm seriously creeped out now lol.

Yeah probably :), was there for a week then saw you around tafe for a bit until one day you sort of vanished...

Small world, always wondered where you went to after tafe, hope to see you around one of these days be good for a catch up  :banana:

Those lian li cases are fkn awesome.

i really need to get a raptor to use for a boot drive, that is the only thing that is letting my system down at the moment

Windows 7 x64 ultimate booting off a R0 isn't too bad, but a few raptors in 0 would be nice, are they still noisy drives?

Windows 7 x64 ultimate booting off a R0 isn't too bad, but a few raptors in 0 would be nice, are they still noisy drives?

they spin at 10k rpm, so they are louder than ur standard drive, but not as loud as seagate or a deathstar.

my win 7 x64 boots pretty dam quick on a 7200RPM drive, but i know it can be so much better

Those lian li cases are fkn awesome.

i really need to get a raptor to use for a boot drive, that is the only thing that is letting my system down at the moment

They are indeed, I've got one....all alloy too.

I've got a 36Gb & a 74Gb Raptor laying around somewhere if interested for a boot drive Carl.........hardly used.

I have a Lian Li PC60 and a Silverstone TJ09 (all aluminium too) and the TJ09 is every bit as good as the PC60.

For the cost of a single raptor, I'd rather 2 x 7.2K RPM drives in RAID 0 for the OS

I'm going with the SSD option for my boot drive, in raid 0

Currently running 1tb raid1 mirror with WD Caviar Black hdd's, quite decent performance in spite of the overheads

-D

They are indeed, I've got one....all alloy too.

I've got a 36Gb & a 74Gb Raptor laying around somewhere if interested for a boot drive Carl.........hardly used.

i'd be keen on the 74Gb one :domokun: i'll get in touch with u when i get back from thailand and i have some disposable income

I'm going with the SSD option for my boot drive, in raid 0

Currently running 1tb raid1 mirror with WD Caviar Black hdd's, quite decent performance in spite of the overheads

-D

Would like SSD's but just can't justify the cost at the moment. I'm running Pro Tools LE 8.01 on my XP boot drive (not in RAID) and I cannot get the PC to sweat yet even with 20 audio tracks with 7-10 instances of guitar rig going at once + various other plugins. I know that these aren't taxing on HDD performance but still I don't think I can justify the cost until I actually need extra performance :domokun:

they spin at 10k rpm, so they are louder than ur standard drive, but not as loud as seagate or a deathstar.

my win 7 x64 boots pretty dam quick on a 7200RPM drive, but i know it can be so much better

Don't find my Seagate drive to be loud at all.

Noisiest drive I've ever had is my 80GB Western digital, in comparision, both Seagate drives I own are quiet as.

I have a Lian Li PC60 and a Silverstone TJ09 (all aluminium too) and the TJ09 is every bit as good as the PC60.

For the cost of a single raptor, I'd rather 2 x 7.2K RPM drives in RAID 0 for the OS

Interesting & clean design that Silverstone case, but it looks like there's too much emphasis on sucking air out & not enough on blowing cool air in IMO.

Can't beat the Lian-Li!

By the way what are the SSD's going for now days?

I'm not sure if I've missed something on the sites I've looked (only checked Allneeds & MSY), but it seems they're all selling only 2.5 inch drives.

Is this what people are using in desktops or are there some 3.5's floating around as well?

Don't find my Seagate drive to be loud at all.

Noisiest drive I've ever had is my 80GB Western digital, in comparision, both Seagate drives I own are quiet as.

Seagates (esp Barracudas) have always been the quietest range of desktop hdds for the last 5 years. WD have better reliability and speed however, which is why theyre more common - seagate is a company that concentrates on their enterprise market (as in scsi hdds, raid arrays, serial attached scsi etc) so they don't promote their stuff as much, and the technology from enterprise eventually trickles down to the consumer level.. that said, Im running the 1tb WD drives for data storage so I'm not really concerned about noise... If I was building a silenced rig (without SSD's) I'd be using the seagate drives in a silenced and cooled enclosure... however SSD are totally silent, very reliable and generate almost no heat - their only downside at this point in time is write speeds and the cost

By the way what are the SSD's going for now days?

I'm not sure if I've missed something on the sites I've looked (only checked Allneeds & MSY), but it seems they're all selling only 2.5 inch drives.

Is this what people are using in desktops or are there some 3.5's floating around as well?

People are using 2.5's because its no longer necessary to have 3.5" hdds. Back in the old days, a 10mb hdd would take up 2x 5.25" bays, and when the 80386 came out they had 3.5" hdd's (this is circa 91 give or take a year)... from next year onwards you'll be seeing cases with 2.5" hdd bays alongside the 3.5" bays - professional Serial Attached Scsi (SAS) drives run around 15,000 rpm and have 150gigs in a 2.5" form factor - the rackmount systems i work on are generally packing a raid5 of such drives

www.solidstatedigital.com.au will have every solid state drive available for consumers. I bought my aftermarket runcore 32gb ssd for my asus eee pc from them, and theyre a bunch of top blokes - i personally will be buying 2x60gb SSD OCZ Vortex when windows 7 comes out and I can buy a copy, then installing them as a raid 0 array for a total of 120gb, with a raid1 mirror of 2 gigs (2x2gb wd blacks)

-D

I did read a little while back that OCZ were bringing out a 3.5" version, which was going to be 2 x 2.5's sandwiched in one enclosure. Thought they looked pretty interesting.

Don't think I'll be buying any for a good year though yet, just to many $$$. Prehaps when a couple of 60GB's get down to about $150 each I'll make the switch.

Interesting & clean design that Silverstone case, but it looks like there's too much emphasis on sucking air out & not enough on blowing cool air in IMO.

Can't beat the Lian-Li!

There is a the massive section towards the front of the case on both sides that is used for intake and the hard drive bays are separate from everything else also. The sheer size of the case too makes for one very finely cooled OC'ed PC which is the reason I went for this particular case. Nothing wrong with Lian Li cases at all, just this TJ09 fit my needs better than any of the Lian Li cases that were on offer at the same time and these are built equally as good. In short, there's absolutely no problem with cooling imo :P

when windows 7 comes out and I can buy a copy, then installing them as a raid 0 array for a total of 120gb, with a raid1 mirror of 2 gigs (2x2gb wd blacks)

-D

I have a retail 64 bit DVD if you want a copy :)

I have a retail 64 bit DVD if you want a copy :P

Thx but Im already running the rc here, and will be buying it for the sake of tax writeoff (that and I try to avoid pirated software these days). $165 for Home Premium which is all I need.

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks! Supercheap has a sale on this weekend so might be a good opportunity to get a new one. I do have a decent multimeter so I'll give it a try either way.   Hah, you got me! I do not. All I know is that the battery holds charge and sits at an okay level before I start the car. Doing the full charge and rejuvenation cycle on a trickle-charger seems to not really make a difference to the cold start behaviour. I'll try and measure it during cranking and see what it does. It's likely terrible; it certainly feels terrible.  I'll be happy if it is really just the battery and I don't have to dick around with the alternator or starter motor.
    • how do you know voltage is fine?  quick easy test is connect DMM up and put it on max/min mode, remove fuel pump fuse, crank car for 3-5s, go check min voltage You'd be surprised how many "healthy" batteries are showing under 10v during this test in cold weather. 
    • Not properly. You need to be able to dissipate 100 amps or so to doing it meaningfully. You can do it indirectly by watching to see how far the voltage falls during cranking. Unplug the coils or something else to prevent it from starting so you can get a good couple or three chugs. It also helps if you have the multimeter set up reading before you start, and that it has max/min functions. So you can catch the real minimum without having to watch the screen, which often doesn't update fast enough to show the real max/min in dynamic situations. Or use a digital oscilloscope, which can be obtained for <<$100 from Aliexpress (although I'd argue for paying up to ~$200 for a nicer one). A >4 yr old battery will very likely be well down the path to the knackery. Many only last 5-6 years these days. The cold weather lately will definitely make it worse.
    • Hmmm, what do you mean by getting weaker? And where did you get that test done? I've been wondering about my battery because the cold starts crank super slowly. The voltage is fine. Not sure if cranking amps can be checked at home. Battery is 4+ years old.
    • No. The simplest wastegate hookup, with no solenoid or other form of "boost control" (ie, control over your boost control, if you know what I mean) is a single hose, direct from the turbo outlet/hot pipe, straight and only to the wastegate actuator. It is that pressure signal that drives the wastegate to open, providing the boost control (and by "boost control" here, I mean, limiting how high it can go, which is essentially the spring pressure of the actuator). You only end up with tee pieces and alternate flow paths once you start adding things to the boost control system to allow you to determine how much of that boost signal makes it to the actuator. There are so many ways to do that that there is no single way to run the hoses and tees and the like. If you have a stock boost solenoid, then all it does is either allow all the boost signal to go to the actuator, or open up to allow some of it to bleed off. There needs to be a restriction in that bleeder to allow only a small amount to bleed off. And in a stock system, that would then be plumbed back to the turbo inlet (for "emissions control" reasons). That is actually what that nipple on your BOV return pipe could/would be for. If you have an aftermarket boost controller and solenoid, then the above is mostly true, but there is no need for a restrictor in the bleed, because the solenoid is pulse width modulated to create a variable bleed off. The air that escapes from the bleed can either be vented, or also returned to the turbo inlet. For emissions reasons it should be returned to inlet, but the amount of air being vented is so small that it really doesn't matter (either from an emissions perspective, or from an air-fuel ratio affecting perspective).
×
×
  • Create New...