Jump to content
SAU Community

Satellite Navigation System

Mid_Nite_R33

By Mid_Nite_R33,
in Car Audio & Electrical

 Share

Recommended Posts

Mid_Nite_R33 Mentor

Mid_Nite_R33

Posted
Posted

Does anyone know if the tv navigation system that sometimes comes installed in imported skylines is any use here in australia? Am I just able to buy a cd/dvd with a map of australia and use it ? If its incompatible can I at least use the lcd and hook it up to a dvd player?

Any help would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/109156-satellite-navigation-system/
Share on other sites
AMS Grand Master

AMS

Posted
Posted
nope doesnt work, my ones a panasonic and its a factory installed one, panasonic only makes the sat nav for japan, no australian maps and plus the sat navs all jap.

Thats gay sir. Mine is panasonic too :/

R33TOM Community Regular

R33TOM

Posted
Posted (edited)

well for my panasonic one theres a input box sitting under the passenger seat, its got 4 sets of AV inputs so you can hook up portable dvd player etc..

im pretty sure jap tv specs are pal as well, although i could be wrong

but than again, the whole damn unit is in jap besides the remote and buttons on the unit. so setting it to use av is not going to be an easy task,

i also got the original manual for the sat nav for mine whole 100 pages worth all in jap.

Edited by R33TOM
  • 1 month later...
  • 4 weeks later...
NO_RSPECT Mentor

NO_RSPECT

Posted
Posted

from what i have read so far on the soarer forums.. you can get a pal to ntsc converter for around $250 - $350

this will allow our pal tv signals to be picked up and used for tv, you might find you can hear some stations.. but not see them

you can also get a portable in car dvd from stratties i think... sansui brand.. will output ntsc as well as pal.. so if the screen picks it up.. then cool

i am researching for an R34 factory sat nav... made by xanavi...so i dont have this nice av input box thingo the panasonic has..

i mean there may be one hidden in the car somwhere.. i gotta look still

just got the thing licenced.. so now the messing around begins

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Watermouse
      Original window sticker?

      By Watermouse · Posted

      I got a full sheet set of OEM copied stickers to replace all the faded engine bay ones, great quality too.  Came from England. Someone like that should be able to to make u up what u want so long as u have a quality image to show them 🤷🏻‍♂️
    • myrbgivesmeheadaches
      RB25DET NEO Cylinder Head

      By myrbgivesmeheadaches · Posted

      Did this end up working? Did you take some pictures?
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
×
×
  • Create New...