Jump to content
SAU Community

Recommended Posts

  • Replies 283
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

There is no difference, except there will be more cops, guarunteed radars, more attention... it's just more fun if you dont have to constantly watch your speed and watch your back for cops... I never speed excessively, but double demerits weekends are when they are out there specifically to hit you up for 6 points for doing 16km/h over the speed limit. Fawk that!

all the biggest cruises usually take place on double demerit weekends as people are free from work due to public holiday

take it easy and you'll be alrite

go hard and you're risking it... just like any other time.

if this goes ahead with all the ppl listed and more, this could be the biggest skyline cruise ever!

I remember a cruise that went down the south coast back in 2004 that had ~56 cars if I recall correctly.

I remember a cruise that went down the south coast back in 2004 that had ~56 cars if I recall correctly.

56 cars... although we have nearly 50 listed, what makes u think only the listed cars will be rocking up? =)

56 cars... although we have nearly 50 listed, what makes u think only the listed cars will be rocking up? =)

Yeah you always get people tagging along or adding them selves on half way thru a cruise its cool tho!!. If I saw 50 skylines go past or in a carpark I would be following them....

Do the cops know about this cruise??

Just Curious

:P

Edited by N1 R33 GTR



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...