Jump to content
SAU Community

My Taxi

kinggts25

By kinggts25,
in Four Door Family & Wagoneers

 Share

Recommended Posts

kinggts25 Contributor

kinggts25

Posted
Posted

Hi Guys,

Just thought since this seems to be the most active cefiro/laurel forum i can find i would post some pics of my build up :D brought a 1989 cefiro manual rb20e ghetto spec...240kms on her....have since....sanded it back made her smooth and painted her :D (all in my garage) and installed the rb20det ;) etc done pretty well so far including the cost of the car i have only spent $2000.... but i have coilovers,intercooler, and 5 stud conversion to go..go some nice 17 inch tanabe 3 piece rims to go on her :)

paint.jpg

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/
Share on other sites
S13Deviat Grand Master

S13Deviat

Posted
Posted

kinggts25 - Mate i would love to pick ur brains about the sanding back and respray! I am about to do the exact thing to mine and have never done it before....

Any chance of a write up of how to, what tools, products used & recommend!!! :D PLZ PLZ PLZ :D

Ie. what did u use to sand her back?? Primer... spraying techniques etc as it looks like a sweet job from that pic....

Ando

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2024503
Share on other sites
kinggts25 Contributor

kinggts25

Posted
  • Author
Posted
how hard was the engine swap to do?

Took about an hour to get the old engine out etc...just used a beam in my garage and a block an tackle :) and about 25 minutes to get the new engine in....the most time consuming part was the wiring which was just pissing around etc...if you have an rb20DE ceffy it wouldnt be a prob though :P it's pretty easy....and the only other mechanical thing i have done on a car is change a diff :) this website is very good ;)http://www.geocities.com/lowrider_c33/

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2026359
Share on other sites
kinggts25 Contributor

kinggts25

Posted
  • Author
Posted
kinggts25 - Mate i would love to pick ur brains about the sanding back and respray! I am about to do the exact thing to mine and have never done it before....

Any chance of a write up of how to, what tools, products used & recommend!!! :) PLZ PLZ PLZ :P

Ie. what did u use to sand her back?? Primer... spraying techniques etc as it looks like a sweet job from that pic....

Ando

;) yeah man if you have msn skylinegt25 (at) hotmail.com...pretty much i used real basic equipment i just spent ages on the prep which gets pretty depresseing... cleaned the car, sanded the body with 120 grit to chew thru the clear coat then sanded with 400 grit before applying the 1k etech primer...think i ended up with about 3 -4 coats of this after applying a lil body filler to smooth out some ripples and get rid of the aerial :) after that i left it for about 48 hours to fully dry etc again, then wet sanded it with 400 grit and then to 600/800 grit (the can only said 400 but i wanted smoother lol)...wash the car reaaaally well...make sure its dry...then just before painting use a wax/grease remover (prepsol or similar)...then ur ready to spray base coat...did 4 coats of this...leave for a good period of time and then wet sand this back with 1500 then 2000...then its time for the buffing....which is a mission...haha get a machine....

Basically follow the instructions on the can for times between coats etc...all the equipment i used was very cheap...

Compressor from bunnings $150

Gravity Feed Spray gun $60 (from trademe)

primer $70

Thinners $ 50

Paint (acrylic lacquer) $270

lots of drop coats for covering stuff u dont want overspray on!! $40

sandpaper etc like $30

and lots of masking tape lol get good stuff....proper painters stuff if you use the normal crap it wont pull of cleanly and takes an AGE to scrape the left overs off...

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2026366
Share on other sites
S13Deviat Grand Master

S13Deviat

Posted
Posted

Mate ur a legend!!! Thanks a million, appreciate the write up! Will be starting the first sand back hopefully this weekend....

1 quick question.... i assume u did the sanding by hand? Sand paper wrapped around something? Or just a good ole piece of sandpaper and i sh*t load of elbow grease?

Cheers again dude!

Ando

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2026378
Share on other sites
kinggts25 Contributor

kinggts25

Posted
  • Author
Posted
WEAR A RESPIRATOR !!

Best thing I bought when I painted my kit. Did the primer on saturdy with one of those white paper masks and was soo f*kn high by the end I walked around dazed for about 10minutes :)

yeah forgot to mention that!! get a GOOD one! when buying the paint get a spec sheet it will tell you which filters to use! i work for a safety equip supplier so i got mine for about $14 they are the best investment ever!!! also good when sanding bog/fibreglass etc :P any thing like that....buy one or u will die.....my garage was soooo full of fumes and shit.... :huh:

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2026425
Share on other sites
  • 2 months later...
  • 2 weeks later...
inark Grand Master

inark

Posted
Posted

one of the things i hated about being a panel basher :D all the bloody dust and fumes.

no wonder i cough so much now.

looks good mate... now i have a garage to work in im going to be doing something similar to my car... pity its a VL lol

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2240784
Share on other sites
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
×
×
  • Create New...