Jump to content
SAU Community

Recommended Posts

Please e-mail me if you're interested in having your car remapped while I'm in brisbane....

Dates are 10th and 11th April

Will be held at DynoSource in Nerang.

LIMITED PLACES - Book Now!

E-Mail Only PLEASE - [email protected]

Link to comment
https://www.sau.com.au/forums/topic/109983-retune-your-factory-ecu-10-110406/
Share on other sites

I remap most Nissan ECU's and the result is often better that most aftermarket computers and the total cost is substantially less. Significant gains can even be made on standard engines.

I would like to suggest that ALL vehicles have upgraded fuel pumps (standard are way bad), full tanks of whatever petrol you want the car tuned on, maintained vehicles (serviced, good spark plugs etc).

Remap Prices cover initial ECU modifications, and loading of pre-tuned maps to suit, these will then need 1-1.5 hours of dyno time tuned specifically to your vehicle and fuel. Dyno time as mentioned will be around $180/hr. ECU modification and Base Maps priced as follows:

S13 CA18 - $330

S13 SR20 - $450

S14 SR20 - $660

S15 SR20 - $660

R32 RB20 - $330

R32 RB26 - $330

R33 RB25 - N/A

R34 RB25 - $660

Z32 VG30 - $330

Chaos - Sure Why not, if it saves me a few hours of stress trying to get a micro guess right.... What loom is in the car?

Dave - S2 and S1 are the same.... I do have a package where I can offer a remapped R32 ECU and use an external VCT controller (like buddy club for $85 I heard)

Just quick one for RB20 people. I had mine done last time Sam was up. Worth every cent hey. And I didnt need the dyno time, just did a quick test and afr almost straight line on 12. Not saying you wont need dyno time, but if you have minimal mods, and it comes out ok, its really good value for money.

I would highly recomend it.

Chaos - Sure Why not, if it saves me a few hours of stress trying to get a micro guess right.... What loom is in the car?

Dave - S2 and S1 are the same.... I do have a package where I can offer a remapped R32 ECU and use an external VCT controller (like buddy club for $85 I heard)

Its an R32 loom, but doubt the car will be back on the road in time, and if it is i wont be able to afford the tune. Maybe next time your up.

Dave - S2 and S1 are the same.... I do have a package where I can offer a remapped R32 ECU and use an external VCT controller (like buddy club for $85 I heard)

Are you sure?? I have recently had to replace my factory ECU on a R33 S2 (1996) and we tried four Series 1 ECU's and they wouldn't even talk to the car. Borrowed one out of a R34 GTT (1998) and it was perfect. Same sticker and serial numbers also.

Moot point for me anyway as I now have a haltech. Thanks for your time though.

Dave

I stand corrected, if you still have your ECU can you take a photo with it's lid off so i can see the board? I may be able to remap them like the 34's :(

Sam.

Edited by Dr_Drift

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...