Jump to content
SAU Community

Recommended Posts

Hi Guys,

As you can see that im selling a bit of stuff. I am giving the garage a bit of clean so selling heaps of parts:

1. Airbox for POD - $60 - shields pod from heat in engine bay. - SOLD -

2. Turbosmart BOV Type II Veeport - $120 each - SOLD -

3. Standard R33 Coils x 6 - $150 lot - all working condition but not strong enough for high boost power output.

4. Aftermarket Ignition system for R32/R33. Purchase from SDU – runs coils on firewall setup and leads to each plug. Couldn’t get the setup working on the r33 but the r32 works well apparently, needs rewiring but easy to do. $300. Comes with coils and high-end ignition leads.

5. Cooler Piping for Hybrid Cooler - $250 comes without turbo smart bov. 2.5’ from Turbo to Cooler. 2.5 which turns to 3’ straightaway from Cooler to Throttle body. Special 180 degree bend to save on piping over the rocket cover to throttle body. Custom Piping made and includes all silicon hoses and clamp. Requires standard blow of value to adapt onto vehicle. It also has a turbo smart blow of value on the turbo to cooler pipe which is under the guard. This piping has big flow benefits than the standard equipment as top end power is improved dramatically due to the increased airflow diameter

6. Greddy Brand New Exhaust Cam Gear - $250

7. GTST Fuel Pump - $80

8. GTR Fuel Pump - $120 - (NA) Cant find it at the moment

9. Ignitor Module for r33 - $100

10. Malpassi 2:1 Regulator - $90 - SOLD

11. Plumbback BOV System for r33 - $40

12. Oil Catch Can - $80 - SOLD

13. POD Filters (3x 3'' & 1 x 2.5'' - $10 each

14. Standard Rear Exhaust (of a gts). $60

15. Standard R33 Clutch 80km - $70

16. GTR Standard Centre Gauges -$120

Im in melbourne and pm me for more details or if you want to purchase it. Prefer melbourne buyers but will send interstate. Im negotiable if your buying a couple of items.

Cheers

AK

post-4729-1142670877.jpg

post-4729-1142670922.jpg

post-4729-1142670944.jpg

post-4729-1142670962.jpg

post-4729-1142670984.jpg

post-4729-1142671030.jpg

post-4729-1142671054.jpg

post-4729-1142671074.jpg

post-4729-1142671098.jpg

post-4729-1142671127.jpg

post-4729-1142671153.jpg

post-4729-1142671230.jpg

post-4729-1142671273.jpg

post-4729-1142671298.jpg

post-4729-1142671316.jpg

post-4729-1142671338.jpg

Edited by WLD747
Link to comment
https://www.sau.com.au/forums/topic/110148-r33-garage-cleanout/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...