Jump to content
SAU Community

Eastern Creek Half day Drive day THURSDAY 3rd April.


Recommended Posts

  • Replies 149
  • Created
  • Last Reply

Top Posters In This Topic

Maj, thanks for that I know that the track is pretty safe. I'm not stupid either so there is very minimal chance of anything happening. As far as cornering lines and so on go I would take to a track day like a duck to water, the issue is the car :D

Anyway, I may come to spectate or hop in as a passenger. I'll decide closer to the time.

Hi Kinks,

Bring the pulsar along, I'd be happy to show you how to peddle a fwd round the track :)

I wouldn't worry about damaging the car, I've bever seen a car damaged at one of these days, even with some of the dcikheads you see sometimes. Stay away from the idiots, drive sensibly and work your way up to speed and you'll have a safe and top fun day.

It is a good idea to spectate & passenger for your first track day, it should set your mind at rest. (unless you get in the car with fatz, of course, that'll scare you out of your wits)

Kinks... Definitely bring your car...

Group C are a bunch of slow-asses, so you'll be fine :P

Trust me...

If you go for a ride in someone else's car, you'd better have you car there to take onto the track, because you're going to want it BAD after your passenger ride :)




  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...