Jump to content
SAU Community

Recommended Posts

  • Replies 164
  • Created
  • Last Reply

Top Posters In This Topic

I pulled 242rwhp with only a pod and 3' exhaust out of the turbo in an auto with the rb2.5t on psi s dyno in perth

then had a front mount and eboost and did 244rwhp at 8 psi and then 250 at 10psi on xspeeds dyno

both places said they had never seen an auto pull that much with thous mods only

james

Ignition system seems to play a part in the power differences perhaps.

I notice that many of the curves are similar on 240/50rwhp cars to the 300ish ones, with the difference coming in up top. If the spark isn't as clean this could account for the power difference. The coils and wires under the cover get very very hot and this effects resistance and reduces the efficiency of wires over time with heat cycling.

no way r33's can make that much power.

the above poster is claiming 267.2rwhp on stock boost stock turbo, HELLO THATS IMPOSSIBLE.

r34 gtts with running 12-14psi with powercf, hi flow exhaust etc etc are only making 260-270HP on the stock turbo.

Edited by noise

I am pretty sure that 25 neo's can only do 195-205rwkw max from stock turbo.

Thats 261.50-274.90rwhp.

how is an older less powerfull rb25 going to put out more power with fewer mods?

it isnt, stop talking shit.

or point me in the direction of threads of people posting dyno sheets to show otherwise.

i dont know why yours didnt make more then 270 rwhp

Shall I direct you to threads showing you this? how about you go to a workshop with a database of dyno sheets and look at them?

I didnt even own the car when it made the power, so i have no need whatsoever to talk it up. Those numbers where made on a DD accredited dyno

The car had

A garrett cooler, not gtr sized, just under.

A mettams morley dump and front, leading into a apexi cat back. 3 inch hi flow cat

11 psi

Walbro fuel pump

KN air filter

s2 motor

manual

standard timing

272 rwhp.

www.antilag.com/personal/tom/my31 for pics of the engine bay etc, so you can see it wasnt packing a hidden t88 etc.

tj

and back to the argument ... 319 rwhp is very very very hard to believe

Edited by dan_the_man
I am pretty sure that 25 neo's can only do 195-205rwkw max from stock turbo.

Thats 261.50-274.90rwhp.

how is an older less powerfull rb25 going to put out more power with fewer mods?

it isnt, stop talking shit.

or point me in the direction of threads of people posting dyno sheets to show otherwise.

umm ok...

im not saying 319rwhp is possable...

but why have many not just one or two, rb25 run between 280-300rwhp on stock turbo?

just because ur r34 didnt make it, doesnt mean its not possable for another rb25 power cars to do it

I pulled 242rwhp with only a pod and 3' exhaust out of the turbo in an auto with the rb2.5t on psi s dyno in perth

then had a front mount and eboost and did 244rwhp at 8 psi and then 250 at 10psi on xspeeds dyno

both places said they had never seen an auto pull that much with thous mods only

james

Hey James! man hows that happening? I only got 202rwhp with 3" exhaust & POD! Damn I'm pisst! What PSI was it at b4 FMIC etc?

Back to the basics,Im sure there not stock but they sure look untouched.

NEO engines have nastie combustion chambers for polution reasons and will ping at less timing than an R33 RB25.

Some shops are not aware the NEO head is different,A few weeks ago a shop removed the head of a NEO fitted to an R33 finding it looked different told the guy the head was an NA head and had to be replaced.

So yes theres lots of misinformation around.

Some strange things have happend to new cars like in the early 70s Fords GTHO Phase 4 was shelved by the government (AS were GM etc)

so ford stuck some parts on a 2 door falcon and tagged it RPO87

the rest ended up in ZF Fairlanes without the new owners ever knowing

and over the years we saw stockers with Noddy iron 9in diffs winged sumps and 4V heads with 780cfm Carbs etc so who knows what may have happened with these cars,Prolly modded very early in life by very carefull mechanics?

got to remember that the dyno is a tuning aid at the end of the day. There is some value in relative comparisons but, not something people need to get hung up on if their car is doing what they want on the road or track. If your tuner is handing the car back to you with improved power characteristics this is what matters.

Some R33 gtst 200rwkw+ cars have run against my old R33 gtst (dyno of 170rwkw) and had an ass whipping both in 1/4 mile time and terminal speed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...