Jump to content
SAU Community

Recommended Posts

Have been getting only 20 miles / gallon from my 93 r33 gts-t 4door auto. Has new NGK Iridium plugs and I use BP Ultra and 10 pounds boost.

Bought the car and had them up the boost to 10lb b/4 I took possession of it, so I don't know what the fuel economy was b/4.

Many people on the net say they get between 26-30 mpg so I was a little concerned. Had a mate of mine who works for one of the Nissan dealers check it out and all the data came up ok.

He said that it must be a combination of being an auto, the upped boost and a bit of a lead foot that is contributing to the low fuel economy.

Just interested to know what some of you guys are getting economy wise.

Thanx

Ric

Link to comment
https://www.sau.com.au/forums/topic/11100-fuel-economy-or-lack-of-it/
Share on other sites

I have no concept of how good or bad 20mpg is. I don't even know how to do the conversion.

My car gets 14-16L/100km around town (usually just under 15) when running at 0.8 bar boost. At 1 bar it is usually just over 15. I am experimenting with a tankful on 0.6 bar to see how much fuel I'll save, if I gain another litre/100km I will set it to 0.6 when I'm low on cash and need to save money on fuel :D (I love EBC's!)

On the highway I get 9.5L/100km on .8 bar and 10.5L/100km on 1 bar. Keep in mind that this is with a lot of spirited overtaking. It's the main thing that keeps me awake!

Man I hate this L/100km crap, makes it really hard to work out how far you can go on one tank on fuel. Sod it, I'm going to start doing kilometres per litre too, starting right now.

14L/100km = 7.14km/L = 428km per tank (fill up around or before 400km)

15L/100km = 6.67km/L = 400km (fill up ~370)

16L/100km = 6.25km/L = 375km (fill up ~345)

9.5L/100km = 10.53km/L = 631km (fill up ~600)

10.5L/100km = 9.52km/L = 571km (fill up ~540)

If I had been working off kilometres per litre instead of this stupid L/100km crap I could have saved myself from a huge stuff-up in refill planning on a recent holiday trip up north. I wasn't sure if I had enough fuel to make it to the next available servo on a round trip while in the area and ended up running around for an extra 60km that I later discovered I didn't have to (long story).

Thanx guys, I guess it must be my fault that this cars is an gas-a-holic.

I deal with metric measurement all day in my work and also relate things back to imperial often, but this litres/100 km has always pissed me off.

My daughters boyfriend is only 21 years old and knows perfectly well what miles/ gallon is.

Thanx again

ric

Originally posted by hippy

how did u get 9.5/100km??  long highway drivin??

Actually, it was my gf taking the car up north from Sydney to Taree (about 300km) to visit relatives, then back again. Worked out to be 9.5L/100km when I did the mileage when she got back. We both then travelled back up the same day (she had to come back to Sydney for a job interview) and I decided to experiment with the boost pressure and set it to 1 bar.

I got 10.6L/100km for the trip up, and 10.4L/100km for the trip back. It was slightly worse on the way up because we had a little bit of city traffic to get out of before hitting the highway.

I guess I should have kept my mouth shut. Some of you guys are doing worse than me . Last fill up was 320km from 45litres, around 20MPG

Realisticly, I shouldn't complain as my Bedford van (work van) with a 400 Chev gets around 12 MPG. It carries a fair bit of weight though.

Guest KILLER-T
my Bedford van (work van) with a 400 Chev
Sorry to get of topic but i seen this bedford van at the end of the midland bypass a while ago it lined me at the lights and took off like a rocket (well it looked fast for a bedford) MMWAHAHA a bedford tryin to chop a SKYLINE :shake: :shake:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...