Jump to content
SAU Community

Recommended Posts

Hi

I'm looking for a good condition R33 GTST (ECR33) or R32 GTR (BNR32) complete brake setup. These are the stuff I need

Front:

- calipers

- rotors

- brake pads (optional)

Rear:

- calipers

- rotors

- rear handbrake cables

- brake lines

- back plate

- internal drum handbrake assembly

- brake pads (optional)

can u pls provide pics as well

cheers

Link to comment
https://www.sau.com.au/forums/topic/111215-r33-gtst-or-r32-gtr-brakes/
Share on other sites

Hi mate,

I have R34 GT-T calipers, and brand new DBA slotted 324x30mm rotors drilled to 4 x 114.3, so they are perfect for your S13.

Paid about $420 for the calipers from Four Brother Imports, about $500 for the rotors from Auto One, and $120 or something to get them drilled.

The rotors are brand new DBA slotted 324x30mm. I ordered them in blanks, and got them drilled at Specialists Brakes & Clutches.

They calipers have pads on them but I was gonna replace them with a set of new racey/track suitable pads.

I'm looking for $850 for the lot.

I can be reached on 0422 046 486, if you want to have a chat.

Cheers,

Mark

IMG_0159.jpg

IMG_0160.jpg

IMG_0161.jpg

IMG_0156.jpg

IMG_0153.jpg

I have a set of R32 GTR Brembos with rotors and pads (front). Std r32 GTR rear with drilled rotors. The rears are still attached to the diff which is complete. You can have the lot for $1200 + ship.

Cheers,

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...