Jump to content
SAU Community

Recommended Posts

Get a dump pipe next 2nd hand or new

from the basic mods that is what i think you lack

then a ecu

what boost controler are you running

good luck and keep at it champ you have the base for a nice liner

james

cheers james,

By the way I have yet to purchase a boost controller. was probably going to buy a blitz one. I actually was talking to someone the other day and they think that those gizmo controllers are great, apparently they have a much better quality solinoid then the base blitz or apexi ones. There made in NZ.

Ill keep the car I think.

Its just at the moment, its running like crap, no stereo, no parcel shelf, needs new tyres,

But motor is healthy I think?? (150psi over each cylinder)

But car is straight and in good condition so I just haver to be patient and eventually it will be done.

Yes ross80 theres a couple of grand to sort out but your mods alone y it is worth fixing

moding can be soo farking expensive and there are alot of people out there that are dodgy

you would have 6-8 thousand dollars in mods so far i recon

james

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...