Jump to content
SAU Community

Recommended Posts

Hi

Has anyone used the Tein Super Streets (aussie revalved versions) or the new G4 coilovers from JustJap in their skylines?

The Teins I think are good because of their softer spring rates (5 front 4 rear) but are about $1850.

The G4's are monotube but with a much harder spring rate (around 13 front and 9 rear, CRAZY!) but supposedly these can be changed and cost about $1400.

I want something for the street, it probably will never see the track. As you may all know, Sydneys roads are really bad so something that is comfortable is a must!

Are the teins good quality? design? comfortable on the street? and good performance coilovers?

I know there is also the other alternative, whiteline springs and bilstein shocks that SK has a group buy for.

Thanks

Edited by nuffsaid

i got the super streets (aus version) in my car. big improvement over the shitty KYB's shocks that were in previously. ive driven it on a very rough section up my street. before my car would bounce everywhere, requiring a heck of a lot of corrections, as well as a sore head. teins, hardly any corrections, and my head is thanking me :D

13/9 seems pretty insane.

i got the super streets (aus version) in my car. big improvement over the shitty KYB's shocks that were in previously. ive driven it on a very rough section up my street. before my car would bounce everywhere, requiring a heck of a lot of corrections, as well as a sore head. teins, hardly any corrections, and my head is thanking me :thumbsup:

13/9 seems pretty insane.

Its definately insane, but you can get different spring rates, dont know if theyll go as low as 13/9 though.

How was the ride height? and previously what springs did you use with your KYBs?

Is handling better on good roads?

And does anyone know if the super streets are both bump and rebound adjustable?

Hi nuffsaid, I though I would jump on give you a bit more info on the G4's that you may or may not already be aware of.

The response we have had from our customers buying the G4's is that they are already quite streetable in standard form, but unlike other brands, we can provide any of our customers with a custom spring rate package, tailored to their requirements - So the standard rates they come with off the shelf are easily changed, and we can supply the custom springs to order, usually within around 4-5 business days.

In short, what we are providing for our customers in the G4 Racing shocks is a fully customizable coilover package, at an unbeatable price, so there is no need to settle for what they come with from the factory, instead you can effectively choose your own spring rates.

If you have any questions please feel free to ask, as we are only too happy to assist you.

Cheers,

Steve Thatcher

Just Jap

(02) 9545 0532

How was the ride height? and previously what springs did you use with your KYBs?

ride height is adjustable, currently at 100mm legal clearance from bottom most bit of the car (exhaust in my case). Im pretty sure it was just the stock r32 springs on there.

Is handling better on good roads?

yer a hell of a lot better. car doesnt seem to "float" no more, though thats a lot more to do with a better alignment and sitting lower than before

-------

if you cant afford the teins, i would get the g4's with a 6/5 spring rate (front/back) if your after street comfort and occasional track use.

Also - even though you have said you won't track the car it's interesting to note that the guy leading the Wakefield lap times (Russ aka giant) runs those Tein Super Streets. Pretty much because Wakefield is a bumpy track and it seems those super streets are great for absorbing the bumps without making the car rolly. (For example Tien HA's don't abosrb bumps well and make a shockingly hard car to drive around in bumpy conditions)

I know Russ rates them pretty highly.

I also run super streets and am happy with them. I can't comment on the G4's other thna the spring rates seem high, but steve has addressed that above.

Just be aware that prices from perfect run and nengun are ex tax and duty, so its a bit of a lottery if you get stuff cheap or if you get stung by customs. It is the importers responsibility to pay, so if it is being shipped direct to you, then you are the importer.

ISC coilovers currently have an introductory offer of $1399 delivered to your door Australia wide with 12 month warranty aswell!! they have a list of common spring rates on there website but can also order in custom spring rates for all street/drift/drag etc uses....

sound damn good to me, will be ordering set shortly

BB OUT.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...