Jump to content
SAU Community

Recommended Posts

Go for the Autronic. You can buy conversion looms from all sorts of people and it has this trick self tuning function.

Power FC isnt to bad try and call up Croydon Racing

Developments in Sydney or Tilbrook in adelaide they are both really keen on the power fc.

Worst thing you can do is to buy a computer which doesnt have a large number of companies who support it or have a clue when it comes to tuning it..

Originally posted by 400HP

Actually they don't have the ability to tune th F Con V pro. Dunno who does actually.

Your kidding?

It's a shame cause I was told that the HKS F con was a good unit but turned away cause no tuner either didn't want to talk or know what it was.

Your kidding?

Nah I'm absolutely serious... the reason I know this is cos about 2 months ago I was gonna buy one cos a guy was selling the FconV Pro for $600 and I thought that was a bargain.... I tried to find out with Ed who could tune it and turned out basically no one in NSW could....

It's an awesome unit and it is a shame cos in Japan it is more popular than the PFC for GTR's....

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...