Jump to content
SAU Community

Recommended Posts

how rich are u running it cos that seems bout right..wat fuel are u using

using bp ultimate 98, oh okay i thaught would get more well this time just now i got 310 out of the tank.

the tune on the wolf is pretty rich if i give it too it but safe so i am happy, comparing to other wolf maps mine is a bit more up than other,but just wondering what other r32's get out of tank???

iam using nismo 550cc injectors, wolf 3d, t3/t4 high flowed turbo and all other usual mods

Autronic SMC - 510cc injectors - T3/T4 - 14L/100km doing multiple short trips (read cold start) with zero spirited driving.

17L/100km if I let it come onto boost slightly during shifts (2psi).

Only got to do one highway run to Phillip Island and back and it had 380kms with 1/4 tank left but the box threw a bearing as I got home so dont know what it would have got.

in my rb20 s14 i got about 30mpg highway and 25 city...

if i romped on it the numbers obviously go down but not as much as you would think, got bout 20mpg being an ass round town on boost alot.

had chipped ecu,550cc injectors, gt30r/hks 3037 turbo,z32 maf.

Autronic SMC (shit cold start, needs more tuning), Apexi RX6 highmounts (17/21 psi), zorst, usual shit. Currently get approx 300 - 350, driving mix of hwy and city. Guess you could say its gets both a cruise and a hard time time. Got cams, 700cc inectors/fuel rail an reg to go in, wonder how it'll all pan out then...

yeah after the weekend i got 325kms out of the tank but doesnt seem that far off the mark then, running 16psi daily and is a mixture of city and some night time driving

Autronic SMC (shit cold start, needs more tuning), Apexi RX6 highmounts (17/21 psi), zorst, usual shit. Currently get approx 300 - 350, driving mix of hwy and city. Guess you could say its gets both a cruise and a hard time time. Got cams, 700cc inectors/fuel rail an reg to go in, wonder how it'll all pan out then...

I have an R32 GTS-t with the following mods...

FMIC, 040 Pump, POD, 14PSI, 3" Ex + Dump, 18" Rims (believe it or not but they can make a big difference in economy) Dr Drift retuned ECU

I generally get about 300-350 per tank normal driving - occasional squirt. Was a lot worse before the tune as it was running megga rich!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...