Jump to content
SAU Community

Recommended Posts

Hey guys, I been reading up and apparently the series II RB25det's have NVCS which is like VVT/VVL.. and also apparently it is controlled by a solenoid somewhere on the engine... at the moment, untill I hit 4500RPM, the tourqe is nothing special.. but from 4500 to redline you get a huge rush of power!! its even noticable on my dyno graph...

Heres my question... is it possible to to have the solenoid always 'on' so that you have the advanced timming on bottom end too?? or to even connect a switch to it similar to the "high boost mode" idea???

Anyone got a pic of this solenoid??

Regards,

Sarkis

Link to comment
https://www.sau.com.au/forums/topic/113681-rb25det-nvcs-concept/
Share on other sites

the VCT solenoid is the hexagonal thing coming out of the side of the head near the end of the fuel rail and the water outlet...

its a simple on/off solenoid which allows oil to flow into the unit on the end of the cam shaft, and change the advance/retard on the cam.

i actually believe that its "on" from about 1500 to 4500 and OFF before and after that.. so you actually sound like you want it off.

you can do a run with the solenoid unplugged and see if it helps your results, but i dont think it will..

im doing a kick off point rpm test at our next dyno day for the NVCS on the rb25. you do a dyno run with stock setup (kicks off at 4500) then plot power w/rpm. then turn nvcs off (make it kick off at say 1200rpm) then dyno run again. plot it on the same chart and the point where the two intersect is the ideal rpm kick off point. im not sure how useful it will be (if anything at all). but still something fun to try.

powerfc users can alter the kick off point via datalogit

right so it does vary a bit on each engine, sweet as.

in the powerfc i can only change the rpm point.

so it comes on always at about 1400 and then off again at 4500.

so you found the ideal kick off point is near 5500 once tuned ?

More linear power curve. If the cam changes to soon you can loose power and torque,if you can changes at 4500 and it needs to be at 5500 for example then you are giving up max power for 1000rpm right in the guts of your curve. Do a power run with the vvt off then do one with it on from start to rev limit and its easy to see where to switch at.

LINKS - Im currently running the Hi-Boost mode on my factory solenoid therefore constant 7psi... my car is fairly stock except for the split dump and 3" hi flow CAT and exhaust + K&N Pannel filter (165rw/kw) and at 4500 - 5000RPM i get a slight pop (at times) from the exhaust and a rush of power to redline! Its not a misfire for sure cause theres no hesitation and the coils + NGK plugs are only 6 months old.. Im definate its the NVCS kicking in via ECU and CAM gears... all i was hoping to do is get it kicking sooner to get more bottom end... i guess ill need an aftermarket ECU...

Do you guys think resetting my factory ECU would help after getting the exhaust or any other mod fitted?? any benifits?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...