Jump to content
SAU Community

Recommended Posts

Yeah, but T1R's aren't cheap.....which is what he's asking for.

We all know they're awesome tyres.

I obviously get a good deal then, didn't realise you guys paid more for them, if its any help my mate uses 19inch nankangs on his 32 GTR and reckons they're good enough (he also drives like a looney).

benm mabye if you get better tryes you might run a better time 300+kw and you 12.7????

My slow 12.7@112mph has nothing to do with my rear tyres being worn Nankangs.

i am perrty shore with 250kw+ you can run a 12, with 300+kw you should be running low 12s all the time

With everything running properly and a decent driver it should be mid 11's actually.

mabye its your tyres ??? Nankangs are carp

Actually it's a combination of my clutch fluid lines needing a bleed and only having the car for 4mths.

For all I know my rear Nankangs may have done 20,000km. I certainly wouldnt put new Kankangs on my car (i'd use Bridgestone, Michelin or Pirelli) but they are fine for now until they need replacing towards the end of this year.

I think Nankangs are the best china-made tyre available in australia at the moment. If you want to use them to get from point A to B, there shouldn't be any problems. Just avoid the other china made brands like Wanli, Dark Horse, Ling Long etc! :)

I think Nankangs are the best china-made tyre available in australia at the moment.

That's like saying that Dobermans have the best tasting dog shit.

I don't give a f**k where my tyres are made, or even who makes them. All I care about is how they perform, and Nankangs, Wanli's etc don't.

Edited by scathing
That's like saying that Dobermans have the best tasting dog shit.

Thanks for that post....ive just laughed a mouthful of orange juice all over my monitor and keyboard.

it was piss funny.....well done "scathing"

Just a quick response on cheaper tyres, I don't have Nankangs but

Another brand worth checking out are the GT Radials as they are a reasonable tyre, I had the Champiro 55's and they Stood upto a couple of track days quite well as well as being a good road tyre, though at the very end of their life mine didn't have much grip.

um i work for a tyre company and basically nankangs are the cheapest crapiest chinese import tyres that we sell. My skyline had them on it when i got it and it was impossible to keep the back (or even the front) lined up under acceleration into corners out of them and just hammering it from the lights.

The compound on them really is horrible, when i took mine off it took me and the guys at the tyre store about 20 minutes to get them both off just because of the crappy compound there made up of and absolutely no flex, try pulling the tyres off a hot wheels car. Ended up breaking 1 tyre bar and splitting the tyre a bit. I put some dunlop spmaxx's on it and now i can accelerate out of a wet corner with no trouble and am totally comfortable on the great ocean road and the black spur in all conditions at most speeds.

It handles a hell of a lot better. Down side is there about $300 a tyre. I got all mine for $300 for 4 because of discounts. I really suggest you stay away from nankangs, unless u want them just to shred and hoon on, there a huge joke in the tyre industry

What about Federal SS595 tyres? Theyre cheap also. I got quoted $148 for 235/45-17.

Federal also make a semi slick track day tyre 595RS 235/45-17 $330

i have them on my GTR, so far got nothin against them, maybe havent driven the car hard enough yet.

Hey mate,

I have a decent set of 3 piece 16 inchs dressed with some cheap tyres (firestones) and im pretty confident they handle better then my new 18's.

I recently purchased a set of 18x8.5 and 18x9.5 rims for me car dressed in Nankang 235/40 and 265/35 on the rear. These tyres are horrible. The only thing i like about them is they seem to be a little more predictable then the 16's.

My main issue with them is stopping power in the wet... mine lock up quite easily.

By the way, mines a gtst not a gtr :sick: didnt see that bit.

Edited by bilbo117

I've got Nankang 235/40 R18's "Ultra Sport NS-II" on the 34 and had them since I bought it, they're reasonably good in the dry and handle OK, but in the wet they're pretty shocking. Never forget the time I first drove them in the wet... lol :). Go for performance/handling over looks any day when it comes it tyres especially.

I use mine for daily driving and don't drift/drag so it's fine for me. If I were to be on a race track I would probably be fearful for my life :D

Nankangs are great for drift ... heheh I've seen lots of cefiros with them. I used them on the front with some smaller wheels/tyres on the back. I must say they got chewed but seemed to perform ok otherwise. I'd definately use them on any car that gets taken on drift outtings - they were predictable and I didn't feel guilty using them harshly.

Wouldn't put em on a skyline but I'd put them onto the cefiro again if I was short of cash.. they're definately a shit tyre so I just wouldn't expect to be beating civics through bends.

Yeah i have Nankang NS-IIs on my R33 GTS25t, 225/40/18 Front - 235/40/18 Rear. I have them as i live in Broome WA and we have pretty shocking roads up here, gravel everwhere, sand on the roads, and huge potholes from the monsoonal rains :D. I couldt really justify spending some big $$$s for great tyres knowing that they would wear excessively quick without even giving them heaps. The nankangs are pretty horrible in the wet, wheels have spun on wet roads, and i wasnt even giving any. Although i think they are fine for a daily driver type tyre, wouldnt do any spiritied driving on them though. Have to say the old 225/50/16 federals i had were better than these. Going to go the 235/40/18 federals next time for $249 (Broome prices ;) ).

cheers

Evil

Well I've got Nankang NS-II and I'm surprised how good they are really. Now, they're not as good as the Japanese/German tyres but they are much much better than really cheap tyres used to be. They actually have a good feel. However I do qualify this post by saying that I've never had other tyres on this particular car. (and yes I've driven on "good" tyres)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...