Jump to content
SAU Community

Recommended Posts

Hey all, I was just wondering what the deal is with going to get permits for mods & taking the car through the pits. I've only been pulled over twice & only the first led to a vehicle check, but I would like to save as much hassle as possible down the track.

One concern I have though is that when they check it out if there is something they won't pass/permit, what happens then? I haven't got a yellow to get off, but I want to get permits for as much of the things as I can so it shows I am doing the right thing. I have a lot of mods (350rwhp, use your imagination ;p ), and I haven't got a permit for any of them. I want to get permits because if I got a unproffessional cop he could write out a list as long as my arm & if I ended up having to take it back to near stock that would really suck.

Can anyone shed some light on this for me? A few things about my car though, the exhaust is turbo back but pretty quiet considering it all, the rims are 17" which are legal, a/m steering wheel but I'm pretty sure it's still legal size & boost gauge on the a pillar but at the bottom so it's below eye level. These aren't too much to worry about & all should go fine & permitted (exhaust excepted unless I get really lucky), but is there much difficulty in things like high mounted turbo's, or any piping or anything like that?

I also have an atmospheric bov, but it does take about 8psi to activate (I run 12) & when it does it isn't even really loud. It sounds serious, not ricey :P. It's welded to the pipe & is pointed into the bay, not facing up. Can you get them passed or not, or can anyone see any trouble for me?

Any help is appreciated, cheers, Nathan

I've never known them to put a sticker on a car that was brought in for a permit.

Especially as you are trying to do the right thing.

They'll either give you a permit or not.

I don't think you will need a permit for a turbo unless it's a highmount or something.

In the stock position one turbo looks like the next so they would most likely not issue a permit for it

Cant answer the turbo one, but I got permits for strut braces, intercooler and piping, pod, manifold (stainless), guages, bride seats, steering wheel, hand brake lever, shift knob, etc

I also have 17" wheels (17x10 and 17x9) coilovers and cat back - the guy said they dont give permits for them as "they are either legal or they are not", but in total I got permits for around 10 different things. The car had just been through a full inspection to transfer rego - I just paid $37.50, went back to them and they wrote the permits up on the spot.

  • 1 month later...

From what i heard from a friend who went to welshpool to ask, they will never issue u a yellow sticker to get a permit as they know u're doing the right thing. But i always wondered if the car is like really bad, would they let u drive it home still?

I've got permits for my hks sqv and exhaust. Need to get the rest of the permits soon.

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...