Jump to content
SAU Community

Recommended Posts

so me and my dad are talkin about fuel prices and i go yeh premium is a killer, then he starts raving on about why im using premium when prices are that high. and i tell him well my car needs dat stuff bein one of those cars ect ect. his like wat kind of crap have u got even my car dosnt use that stuff (series 5 bmw).

his argument is sure he should put that stuff in his car to...everyone wants to...but wheres the money gonna come from. is there anything i can say to him to explain my SPORTS car needs it? he rkns just cuz my car costs 30k and not 130k its not worth it.

in a way i do agree with him but.......i wanna take care of my car lol

Link to comment
https://www.sau.com.au/forums/topic/114386-premium-vs-unleaded/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Its the octane in the fuel. Our cars are tuned for high octane fuels. Regular fuel in japan has a higher octane then the premium fuel we have in australia.

You use shit fuel, you get engine knock, which is not good. Do a search for Ping, Knock, Detonation, Pre-Ignition, rich and retard - you'll start to understand why you need to use premium fuel.

Tell him you have a turbo and he doesn't. Go into the jargon about how advanced your timing is and the Japs run their cars on 103RON etc, etc, etc. Just confuse the guy and he'll give up.

Being a 130k 5 series and post 93, I'm assuming he's driving a 530i and from all accounts, his car should be using premium unleaded too.

I use premium or an ethanol blend fuel.

If I don't, I get (audible) pinging. If you don't mind the risk, you could duplicate the experiment.

Boring old ULP, 2nd gear and full throttle to (almost) redline. Um, offstreet or pulling onto a freeway for legalitys sake.

Mr Italy! is right. just tell him your car will ping, and then tell him how much a new engine (plus labour) will cost. Its like insurance, only alot more fun.

thats wat i wanna tell my dad but i cant exactly say my car runs my efficiently at redline LOL. he be like....wat??? ur speeding.

and that willl be the end of it

i tell him the car runs better but yeh....i dunno his one of those dads that u either listen or shutup

i put regular unleaded in my stock as a rock R33 GTS-t when it first got off the boat and it PINGED all the way to compliance!

haha well theres a whole 10RON difference between the fuel it tasted before it got on the boat and after it landed...

Being a 130k 5 series and post 93, I'm assuming he's driving a 530i and from all accounts, his car should be using premium unleaded too.

Exactly...

LOL tell your dad he SHOULD be using premium unleaded as well.

Besides, it isn't a big difference at the end of the day.

Saving those few cents isn't going to make your rich, nor is spending those few cents going to make you poor.

That's my moto.

Not to mention the extra detergents and stuff in the premium fuels, goes along way to keeping your fuel injection system nice and clean.

Your Skyline has active knock sensing that will retard the timing by x amount however, it isnt designed to pull timing enough to cater for a drop in ron from 100 to 91.

Besides, once the system even your old mans pulls the timing etc, your fuel consumption and power will go to the shitter.

So he may not end up saving 4c/L after all.

Just lately i've been thinking about the whole ULP Vs PULP debate and i'm starting to wonder if it's worth it. Ever since i've had my car it's had only BP Ultimate which is 10 cents a litre dearer than regular ULP. And i'm wondering if it makes and difference what so ever. The compliance manual that came with my car says 91 octance.

And just the other week i had this guy who was probably around 50 years old come in the most mint series 2 r33 i've ever seen come and and put regular ulp in it. And when i asked him about his car he said he was an importer and had just bought it back from japan along with a couple of R34 GTR's. He said he runs the GTR's on PULP but he reackons the GTST are fine on ULP.

yeah, he runs it on ULP because he's an IMPORTER and he DOESN'T GIVE A CRAP about what happens to the cars, as they're not his for very long, lol..

as for your dad, well, he should be using PULP in his cars as well, as thats what BMW Recommend.

He could possibly be voiding his warranty (though, by the sounds of it, that ran out a while back, if its a 93 model), as BMW Recommend their customers use PULP

There's a sticker underneath my hood that says use equal to or greater than 95. (93 33 det)

However, I' not sure if this was put there during complience or factory.

It also says that the ignition timing should be 10 degrees- I thought that it is suposed to be 15. :(

Regardless, all jap cars are suited (timing-ignition maps) to jap fuel, and should be run on 95 or above. I have seen countless threads where people put better fuel in the tank on the dyno and get better results, and less knock.

post-19015-1145658857.jpg

Thats a bit harsh, my dad reackons i should be riding my pushbike to work instead of driving cos of the cost of fuel, doesn't mean he's stupid.

You junkbroad minded person. Sounds like you came from a very unloving family.

Also this imported dude said this new car was his new daily driver.

And that sticker under your hood is a compliance sticker. Your car should have them in a few places for things like service intervals, tyre sizes and pressures etc, etc.

Mine says 91 RON and thats on a R34.

i think everyone is a little shitty with petrol prices... but the difference between ULP and PULP is less than $10 a tank... it's hardly gonna break the bank... and my theory is if u want feul economy, by a daewoo or something equaly girly, if u want performance, you gotta pay the price...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...