Jump to content
SAU Community

Recommended Posts

hey people,

i am looking to buy and fit a hybrid kit to my car (1992 r32 gtst rb20det). the cooler i am looking to get the "Skyline HYBRID Intercooler Kit - GT Spec" same as the one on the powerdigger website. the kit comes with everything from the cooler itself right down to clamps and tools. it is says it is a bolt on kit, i just wanted to know whether there was anything i need to cut or any problems i should look out for when fitting this cooler.

if anyone has this kit on there car could you post up some pics of it behind the stock bar. my car has factory foglights will i be able to keep them after the cooler is on?

lastly, how do you rate it from a performance perspective? is it worth the money?

Link to comment
https://www.sau.com.au/forums/topic/115044-hybrid-fmic-on-r32-gtst/
Share on other sites

hey mate i asked the exact same question as you. i found out that you definatly will have to cut your front bar and also cut a small hole in your battery tray so the pipes can go up and over the fan. other than that they a good cooler, by the way how much did you get queted for one cause there is a fella on here by the name of gr33ddy selling the whole kits for a good price (check out the for sale section, under buisness traders) and if you want more info on how to install the cooler pm a guy called flagger on this forum he just did and his were i got my info from. Hope that helps

cheers mate

Luke

hey mate i asked the exact same question as you. i found out that you definatly will have to cut your front bar and also cut a small hole in your battery tray so the pipes can go up and over the fan. other than that they a good cooler, by the way how much did you get queted for one cause there is a fella on here by the name of gr33ddy selling the whole kits for a good price (check out the for sale section, under buisness traders) and if you want more info on how to install the cooler pm a guy called flagger on this forum he just did and his were i got my info from. Hope that helps

cheers mate

Luke

could you post a link to which part of the classifieds man, im a n00b. which front bar do you have? i have the bigger front bar not the small one. did you have to hack it to pieces or just shave the back of it?got pic?

Hey mate sure thing heres the link

HYBRID Coolers

i havent done it yet mate, im in the same boat as you. I have a GTR front so i dont know if i have to chop it up, but i do know that the stock front bar will have to be shaved at the back. PM flagger for more info he just did the install.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...