Jump to content
SAU Community

Where To Get Twin Tip Muffler ?

tezzy

By tezzy,
in Engines & Forced Induction

 Share

Recommended Posts

J_Red33 Experienced

J_Red33

Posted
Posted

Hey how are you, I've been looking for the same thing for quite a while, & as far as jap bolt on's are concerned there is stuff all available. There is an Apexi 1 that nengun sells I believe as stated above but it's only got a 2.5 inch inlet. Kakimoto did make one, but it's discontinued much to my dissapointment. The only other alternative I know of is Reinhard, but they're meant to be 95 dB according to 1 place that sells it even when they are silenced!!

If you really want a twin tip muffler that's not too loud however, go and get a custom system, I'm about to be doing the same myself as I've been searching for several months & apart from what I have mentioned have found nothing. So I wouldn't spend too much time searching if I were you.

Bliksem Veteran

Bliksem

Posted
Posted (edited)

cimg05474bs.th.jpg

Mines one of two that were im ported by option 1 garage, I got it a couple of years ago when the "Canon" Muffler phase was at its peak, but I wanted a twin system, took me ages to find mine.

Its a Fujitsubo. I beleive this model is now discontinued though :devil:

Edited by MintR33
Craved Grand Master

Craved

Posted
Posted (edited)

heres mine, pretty sure its an X-Force ..

3" inlet.

although i am going to have to find a way to run 2 of them..

edit: this tip is now a gold colour since its stainless

post-5157-1146212180.jpg

Edited by Craved
RANDY Veteran

RANDY

Posted
Posted

I'm planning to mod a stock R33 muffler. Chop off the in and out pipes, then weld on bigger pipes, open up the muffler, and convert it into a "straight through" kind of design using baffled tubes.

Making it fit the Nismo 3" catback section will be tricky, methinks!

Currently looking for a used muffler, so I don't have to cut mine up!

J_Red33 Experienced

J_Red33

Posted
Posted
cimg05474bs.th.jpg

Mines one of two that were im ported by option 1 garage, I got it a couple of years ago when the "Canon" Muffler phase was at its peak, but I wanted a twin system, took me ages to find mine.

Its a Fujitsubo. I beleive this model is now discontinued though :)

Yeah I had heard that they had made 1, but couldn't confirm it.......... bastards! Well it's cost them a sale cos I would have bought one of those, that looks just nice. Is it twin 3 inch?

J_Red33 Experienced

J_Red33

Posted
Posted
Cheers guys.

Dam Electro that is not what i wanted to here :)

MintR33 that is hot, i would love something like that pity it is discontinued.

I wonder if i could source a 2nd hand one.

Yeah sorry mate, but at least you don't need to go through all the crap of trying so hard to find 1 you could cry :O .

By the way I doubt you'll find a second hand twin Fuji since as MintR33 indicated they are very rare. Not unless someone happens to be upgrading to a 3.5 inch system that has 1. Sorry again.

I'm going to be getting a custom 3 inch system with JunBL Muffler & custom tips, will show you what it looks like when it's done. Will probably be a couple of weeks.

  • 4 weeks later...
EvilINGT Community Regular

EvilINGT

Posted
Posted

Same here

Im looking for a twin outlet exhaust system. The drift brand that autobarn advertise in HPI have one, and the other that i have seen is the Reinhard (look damn cool though). Ive got a sedan and have an x-force 3in system with a barrel muffler, little did i know when i bought it, that it was the "angled" type and looks a bit strange sticking out to the side, as it sits too close to the bumper :O. So im looking for a nice dual outlet muffler like the reinhard - dual separate mufflers, 3in inlet -> 2 x 2 1/2in - 3in barrels? Wonder if that decibel rating is just the muffler or a catback system?

cheers

Evil

mazgtr Community Regular

mazgtr

Posted
Posted (edited)

I got rid of my 4inch cannon HKS race muffler, for a custom 3inch straight through sports muffler. I had it custom made, its gotta be one of the biggest bodied mufflers going!! Id say 50cm x 35cm x 25cm, its 3inch straight thru, with twin 3inch tips. Knocked about 20-25 decibels off my GTR, Quick fit Mufflers made it up for me, took about a week..

Edited by mazgtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...