Jump to content
SAU Community

Recommended Posts

Hey every one,

Just wondering if any one knows whats going on. I own a R32 Gts-t only some times when im driving around my car will just stall or start dropping in and out and then will just start working again or just stall and it will take 2 or 3 times to get it started up again. What do we think it is ive been told millions of things like fuel pump,spark plugs, coil packs, air flow meter ect ect. Has this happened to any one else or does any one have any ideas.

Its not my BOV cause i have an Idle stabliser and it randomly happends not just when i depress the clutch.

Also does any one know any good work shops that could fix this problem for a half decent price.

Thanks guys.

Sounds like a problem ive got at the moment. it only happens with me sometimes though. not all the time. I put it into diagnostic mode and came up with the codes 12 and 21. 12 being the AFM's and 21 being the ignition. Im gettin around to it today.

you know how to put it into diagnostic mode right? i would explain how but ICBF sorry.

go to this site http://www.overflow.250x.com/ then click on "sky is the limit" on the side. there it will tell you how to diag your car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...