Jump to content
SAU Community

Recommended Posts

Could someone tell me exactly what I'm looking at?

10000301ko.jpg

I don't know much about cars in general, and all I know about this one is it's a 1986 Nissan R31 Skyline GX. I bought it off a private seller for AU$2,000.

I'd like to know what all the bits are and what the performance should be like.

Cheers,

-Bazza :bunny:

Link to comment
https://www.sau.com.au/forums/topic/115624-what-am-i-looking-at/
Share on other sites

It's an RB30e, rather stock looking.

I'll take a stab in the dark and say it's an auto due to the lines running along the firewall, and it also appears to have cruise control.

You'll find pretty much everything you want to know about it here.

153.162 to be accurate.

114.3Kw x 1.34 = 153.162HP

I didn't think the .3 was really worth adding into the equation :)

Either way, it's more than enough power for an L plater, and certainly enough power to get you into (or out of) trouble.

Is it a GX, or a GXE model?

I love the dark blue 31's.... but I assume it used to be white?

If you paid 3k for it with the mags and kit already on it, you've done fairly well.

Dunno if you were after any suggestions on mods, but I'm going to offer a few anyway :)

Remove the Nismo badge and use it as a frisbee.

I was looking at the car thinking "nice, nice, nice....." then I saw the Nismo badge and my thoughts changed from "nice" to "rice" :P

Probably also remove the red thing on the drivers door (unless it's there to cover a scratch in the paint work). :rofl:

Change the centre garnish on the boot so that it matches the tail lights, or change the tail lights so they match the garnish.

It looks rather odd how it is. :ermm:

Do something about the exhaust. :(

Lower it.. a set of low Kings or similar... the 4WD style ride height detracts from the pimp factor of the body kit.

Is it a GX, or a GXE model?

GX

I love the dark blue 31's.... but I assume it used to be white?

It's black. :D and it used ot be cream, as indicated by the engine bay.

If you paid 3k for it with the mags and kit already on it, you've done fairly well.

I payed $2,000 after haggling.

Remove the Nismo badge and use it as a frisbee.

The original badges have gone ta-ta's so the Nismo badge will be staying for a while yet. :(

Probably also remove the red thing on the drivers door (unless it's there to cover a scratch in the paint work). :)

I tried to pull it off but it was leaving glue-marks so I just stuck it back on.

Change the centre garnish on the boot so that it matches the tail lights, or change the tail lights so they match the garnish.

It looks rather odd how it is. :rofl:

I think it looks different, which is exactly what I want this car to be: Different (and attention whoreing) :P

Do something about the exhaust. :P

I rekkon if I try to move it I'm gonna break off the bodykit.

Lower it.. a set of low Kings or similar... the 4WD style ride height detracts from the pimp factor of the body kit.

I like the ride height as is. IMO any lower would look like every other wannabe pimp with 20 inch chrome dinnerplates. :)

I want this car to be different, and to reflect myself. I do appreciate suggestions but I'm going my own way with this car.

untitled1ng.jpg

How would a spoiler such as this one I drew in MS Paint look in the boot? I was hoping I can find one where the legs would fit either side of the indentations on the boot and the wing would be the same width as the boot itself.

I think those lines are brake lines but he hasn't denied it's an auto.

You can take this as my denial :ermm:

1000021gc.jpg

Edited by The_Bazzanator
untitled1ng.jpg

How would a spoiler such as this one I drew in MS Paint look in the boot? I was hoping I can find one where the legs would fit either side of the indentations on the boot and the wing would be the same width as the boot itself.

1000021gc.jpg

Something like this! you trying to create???

That car is hideous :O.

And what can ya expect for a 20 year old car? XD

I don't want something quite that stupid. Imagine the spoiler on a V8 Supercar. Thats pretty much what I'm after.

And yes I am an attention whore so :rofl: .

Dont' forget that the boys in blue will also give you attention if you make it look dodgy.

I respect your intentions but please don't put that wing on it or any other wing apart from one factory released for an R31 Skyline.

I think tinting the windows would be a good idea for looks, coolness in summer and security.

btw, it wasn't me that suggested you had an auto.

That car is hideous :(.

And yes I am an attention whore so :rant: .

No worse than a black R31 with the shit you want to hang on it.

Remember your on L's and the law, even in SA just love clayton's hot shots like you want to be.

Maybe you should at least learn how to drive before you become another idiot behind the wheel.

It's my car, so I can do whatever I want with it, even if you lot think it's a bad idea.

If I do this right it shouldn't look that ugly... I never said I was going to put a 10 foot tall wing on the damn thing o.O

At least they're on HR31 Imports with what amounts to some real performance, but this guy wants to put them on a poxy old stock R31 and most people with any knowledge are just gunna laugh their heads off. But as he says, it's his car and he has the right to make a fool of himself if he likes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...