Jump to content
SAU Community

R32 Passanger Door Wont Lock

=premo=

By =premo=,
in Car Audio & Electrical

 Share

Recommended Posts

=premo= Mentor

=premo=

Posted
Posted

hi, a friend of mine has a viper remote start alarm in his R32 gts-t. when he locks the car the front passanger door dosnt lock (four door). the only way to lock it is to flick the switch while holding up the door handle and closing the door (normal non central locking way). is this a comman problem with R32 gts-t's?

i had a good look at everything in the door and i couldnt find anything wrong but then i havnt worked with central locking before. should he take it to someone or does it just need a new actuator?

thank you

Link to comment
Share on other sites
brainlessnoob Explorer

brainlessnoob

Posted
Posted (edited)

heya i got a 32 gts-t and the guy who was installing my immobilizer and alarm told me my left hand door locking motor was on the way out. Sure enough few days ago it died. It still makes the sound like its trying but it doesnt make it to lock, gotta hand lock it. Quoted $45 to fix so ill probably just go there. But for a new motor (assuming that it is making the noise) its about $15, if u are intelligent enough you can chuck it in yourself( which i evidently am not) Only difference is mine is a coupe and the lock is next to the handle so it needs to be locked from the drivers side, whilst inside the car

Edited by brainlessnoob
Link to comment
Share on other sites
=premo= Mentor

=premo=

Posted
  • Author
Posted

thank you, i took a look at mine and it does seem to move quicker than his.

anyone know the part number???

cheers, daniel

Link to comment
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted
thank you, i took a look at mine and it does seem to move quicker than his.

anyone know the part number???

cheers, daniel

nissan can look it up easily. mention R32gtr and they will find it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kip
      Custom Exhaust Questions - RB25DET Neo

      By Kip · Posted

      I'm struggling with a similar issue on an RB26. Make sure you know whether it's volume or resonance. Mine seemed louder when cruising compared to at idle. I downloaded a decibel meter for my phone. Take my less than scientific results with a couple grains of salt, but the decibels were the same at idle and at cruise. Mine seems to be a resonance problem. At 2500-3500 rpm, the sound is different and "louder" to my ear. I think it's vibration from the pipe, the car body, the floor or something creating tone. Anyway, consider that it may not be strictly a volume problem.
    • Rezz
      Gran Turismo 7 Time trial

      By Rezz · Posted

      Does this count as a time trial as well? I got all gold in the master super licence (1 lap time trial) and received a McLaren MP4/4 for my trouble.  If anyone else has done this, did you ride the wall right around the first long right hander at Lake Louise snow track to get gold? I couldn't do it any other way... best I could do without riding the was was within 2 tenths of the gold time.
    • MBS206
      MLR's Bogan cruise ship

      By MBS206 · Posted

      I definitely get the low power, sporty car to drive to smash gears but not be doing eleventy million miles an hour! It makes all the normal drives fun!   Rev match tune sounds like the funs! I didn't know the NC had a DBW throttle!   As for me, still have the Skyline, it still has the Barra in it. It's been pushed to the side of the workshop at the moment. Pretty much waiting on me finishing the wiring, and dropping new fuel lines in. Got myself an ACDC Tig end of last year so been teaching myself TIG welding to build a few things for the Skyline. The missus wrote off her GTB liberty at the end of last year, and got it back on salvage rights stupid cheap. It's also still registered, so will mean easier for me to take to the track already done most of the panel damage, just playing "clear the workshop" to make space to pull the motor and box out, fix some oil leaks, replace the clutch, and replace a few minor broken things.  Also got a Lathe at the start of the year, which is adding to the annoyance of no space, which is another reason I'm trying to build things to get more space, to get the Lathe back in a final home for it. It's a BIG lathe, can turn a 355mm diameter, and 1metre between centres... Got it at a steal! So between it and the TIG and old MIG welder, I'll be fabbing some fun little shit up But we've had a lot of shit stuff happening at home, so it's slow going getting things done. But one step at a time!
    • PranK
      Gran Turismo 7 Time trial

      By PranK · Posted

      I love Catalunya.  Got a 1:54.632. The AMG is a hoot.
    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      I hadn't got that far, my main worry was the connection to the actual calipers themselves. I'm just using new (ish) stock brake lines in the stock setup. I've just had a stud welded to the knuckle that is a little lower than the original stud (so my knuckles have two studs each side) to not have it be stretched so far in previous BBK setups, so the "block" (in the second picture) mounts a little lower for me and I hope I don't need to change anything. I may have even changed the connection to the calipers in the past and have since forgotten I did that. I may not have. Guess how I'm gonna find out. Source: hopium
×
×
  • Create New...