Jump to content
SAU Community

Recommended Posts

hey all.

im fairly new to the skyline... infact japanese import scene in general. just recently purchased a 1995 nissan skyline R33 GTS-T. it only had 51,000km on the clock.

ok before you laugh and say what an idiot. a 1995 skyline with so few k's? i thought the exact same thing. i did do alot of umming and arrring before i bought this car. i got it fully checked out, i looked over it myself and test drove it. i was astonished, the interior and exterior were immaculate. not a scratch or dent in the body anywhere. no marks or tears or anything in the interior, everything worked as it should. so i was beginning to think it can't be too far away from what's on the clock, even if it is wound back alittle out of japan.

then i found this. 100,000km sticker right smack bang on top of the engine. i did look under the bonnet. but i think i looked everywhere except for the easiest place to look, top of the engine haha.

the sticker is completely in japanese and i can't read it... only thing i can read is the 100,000km part. i have bin told that the sticker means its gone through its 100,000km service. then ive bin told the sticker just says the timing belt needs to be changed at 100,000km. before i bought the car, the guy changed the timing belt for me anyway.

so my question is, does anyone know wat the sticker means? do they have it on their cars? and if so, is there anyway to tell really how far it has gone past 100,000km? car has no log books etc which dosent surprise me.

thanks in advance,

brendan

post-28689-1146892012.jpg

Link to comment
https://www.sau.com.au/forums/topic/116606-are-my-worst-fears-confirmed/
Share on other sites

I've heard the same as you, could be timing belt to be changed at 100,000 or it has had it chnaged at 100,000..

A car with 100,000ks on it can still be in very good condition, average person may do 20,000k/y, = 5 years of driving, go check out a 5 year old car, there will be lots out there that look immaculate...

Either way don't stress to much, the main thing is the condition of it, not the number that the odo says..

Speaking as a mechanic in the jap import industry, that sticker is there from factory to make it clear that the belt is to be changed. The japanese are going back to chain driven cams, so this may give them a proper reminder.

I know on the GTR engines there is also a tag on the crank angle sensor that must be torn to adjust the timing. When you by a timing belt from Nissan you get a sticker to put on the engine, which you write the next belt change on, and also the sticker to go over the crank angle sensor once the timing is set.

In my experiance (8 years in automotive industry) the actual kilometers a vehicle has travelled isn't all that useful in determining if the car is a decent piece of kit or a rooted out piece of junk. I've seen cars with 250,000 kms look like new. and I've seen cars with 50,000 kms that are good only as scrap.

So take your time and check wearing parts like suspension and steering, brakes, and condition of things like hoses etc. you'll get a better indication of that rather than the speedo. My vl turbo had done over 200,000 kms when i bought it, now its nearly done 350,000 and the main issue ive had is an alternator.

Ok my R32 has no sticker on the timing cover, does this mean that the timing belt has been done??? I actually think someone may have taken it off or came off? Is there any other way of telling if the timing belt has been done recently??

ahh ok thats good then. thanks guys

Exactly the same situation mate, bought mine at 73K on the clock, looked immaculate everywhere, but when i reached 100K the odo stuck and also doesn't line up quite properly, which is a sure sign its been wound back. Like ferni says, worry about the actual condition more. I'm on 140K at the moment and haven't had any major issues that weren't caused by myself or someone else.

timing belt change is expensive, but new engine is even more expensive :D

For the record, on a R32 GT-R its about $400 if the water pump needs replacing (and possibly more if any of the tensioners/guides are worn).

My car is finally getting its belt changed this coming friday; I'll be able to sleep that little bit easier :P

Yeh I recently imported my 1990 r32GTST its in great condition,but its done 115ks and Im getting my timing belt done next month as my sticker has faded and cant make out when timing belt was done..

Just to be on the safe side, Id rather pay the money.. as dont want my car to die :P

well the guy at the used car yard changed the timing belt for me anyway, to be on the safe side. so that's no worries. just was more concerned with the condition of the rest of the engine... ie how good a nick the turbo would be in.

i have a sticker on top of my engine (r33) and it had 68, XXX km on it. Would this mean they changed the timing belt at those km's?

I bought my car when it had 77, XXX km on it a few years back. It's on 103, XXX now and when i came up for the 100 000km service my mechanic said the timing belt had already been changed. So i assume that this is what the sticker indicated...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...