Jump to content
SAU Community

Recommended Posts

Hey all

Well were do i start, My step mum just picked up the new WRX hatch the other day and let me take it for a bit if a hoon :(

ok im comparing this to my relitivly stock r33 gtst ,

ok , first thing that blew me away was the handeling, i was obsolutely amazed at how the car just kept track, i couldnt do the same menouvers in the 33, i was actually tring to get this thing to show a bit of slide but i couldnt get its ass to budge, suspension was nice, my 33 feels every little dent, bump in the road , i approached a speed hump and slowed down to about 20 ks, my dad told me to "hit it" so i took the hump at about 40-50 and didnt lift off my seat,

then there is the turbo :(

compared to my car which really starts to pull at about 4-6000 rpm the wrx was pulling from 2.5-5, after 5gs it really started to shit itself and didnt move much after that,

all in all i was pleased with the performance side of the car and its handelling , the car would out run mine off the line but give me a big straight and thats another story

Link to comment
https://www.sau.com.au/forums/topic/116850-my-review-of-the-new-wrx/
Share on other sites

wouldnt mind those liberty STI's.. that will be a sleeper for sure..

Back to the topic.. how is the interior compared to the skyline?? the dash n all??

ahaha funny you mention the iberty seeing that my dad bought his last year lol not the sti version unfortunatly lol still the 2 L turbo kicks ass, such a sleeper of a car

the interior is very plain the sound system is pathetic, might as well go buy a $50 system from supercheap (honestly) only got 4 speakers and all trebble lol, the dash is nice with the RPM's metre dead in front of you, the k's on a smaller dial just to the left

I agree with the newbie above :laugh: get a turbotech boost controller the reason why it feels like it really kicks in up high is the factory dual stage boost controller

newbie?

you dont need any form of boost controller to make it 7psi straight away rather than 5/7

ahaha funny you mention the iberty seeing that my dad bought his last year lol not the sti version unfortunatly lol still the 2 L turbo kicks ass, such a sleeper of a car

the interior is very plain the sound system is pathetic, might as well go buy a $50 system from supercheap (honestly) only got 4 speakers and all trebble lol, the dash is nice with the RPM's metre dead in front of you, the k's on a smaller dial just to the left

Huh? Not a liberty RS or something??? If its the B4 dude, that is a rather high end stereo. I do hope your talking about an RS.

That kit on the WRX doesn't look to bad, bit over the top, wouldn't mind it a bit less in your face but similar style...

I like the fact that it gets rid of the nose, I think the car looks tougher with just that pug nose gone

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...