Jump to content
SAU Community

Rb20 Replacement

Jaystar

By Jaystar,
in Queensland

 Share

Recommended Posts

fat31 Community Regular

fat31

Posted
Posted
Hey all

Just wondering if anyone has ever had a rb20det replaced in there car?

If so how much did it cost you, where did you get it done and were you happy with the work.

Brisbane only though.

Thanx

yep had plenty of experience with rb20 replacements always been happy with result, just some advice id stay away from tokyo toys racing they will rip you off and stuff you around. as for price it depends where you go it could cost anywhere from $1000-$1500 for motor and about $600 for a gearbox. diy replacement is very easy as the rb20 is quite a simple motor to work with.

The Dan Grand Master

The Dan

Posted
Posted

Engine should cost you around $1500-$2000 for a decent one.

6-8 hours @ $55/hour = $330-$440 + any fluids, belts, filters, hoses that may be required.

I would budget $2600 and you should be ok.

I thought you were getting your rebuilt by someone at the moment Jay?

Jaystar Collaborator

Jaystar

Posted
  • Author
Posted
Engine should cost you around $1500-$2000 for a decent one.

6-8 hours @ $55/hour = $330-$440 + any fluids, belts, filters, hoses that may be required.

I would budget $2600 and you should be ok.

I thought you were getting your rebuilt by someone at the moment Jay?

i was going to get it rebuilt and modded but then started to think about selling and then this happened and was undrivable so now am getting another rb20 put in and will decide what to do.

probs move on.

The Dan Grand Master

The Dan

Posted
Posted
i was going to get it rebuilt and modded but then started to think about selling and then this happened and was undrivable so now am getting another rb20 put in and will decide what to do.

probs move on.

Well I can still do a full rebuild for $3200 for you. That includes engine removal and refit....plus complete head service with valve regrind and new stem seals + guides...plus full block service, crack test, re-deck, hone, all gaskets, seals, oil, oil filter and labour. For an extra $100 I can get the injectors fully serviced as well.

Anywayz...just another option for you...

What happened to it by the way?

Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Id go the rebuild...

Ive been burnt twice with half cuts and unknown motors...

Rebuild is worth a couple of bucks more and at least you will know what you are getting. Plus its newer this way also...

If your not mechaniclly minded and dont know any trust worthy workshops, then Dan is ya man....

The Dan Grand Master

The Dan

Posted
Posted

Love the kind words fellas...keep 'em coming.

And yeah like Col said, if you aren't mechanically minded, know anyone who is, know anyone who knows anyone who is, know anyone whose cousin's friend knows someone who is....then I'm your man :D

But honestly, even if you are mechanically minded you shouldn't tackle a rebuild with at least someone who has done it many times before to guide you. It's a little more than slapping nuts and bolts together.

The Dan Grand Master

The Dan

Posted
Posted

You mean you actually think mechanics do something during the day....nah we just lean up against the hoists and sink beers, make up stories, laugh at random comments, then drive all the cars out and charge the customers for work we never even did.....ahhh it's a great life.

dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted
Well I can still do a full rebuild for $3200 for you. That includes engine removal and refit....plus complete head service with valve regrind and new stem seals + guides...plus full block service, crack test, re-deck, hone, all gaskets, seals, oil, oil filter and labour. For an extra $100 I can get the injectors fully serviced as well.

Anywayz...just another option for you...

What happened to it by the way?

Compleatly unrelated to the topic. But injector service for $100??? Including labour!? Dude thats good hey.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...